lkml.org 
[lkml]   [2021]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 1/3] arm64: dts: mt8183: add dpi node to mt8183
From


On 10/11/2021 20:24, Fabien Parent wrote:
> From: Pi-Hsun Shih <pihsun@chromium.org>
>
> Add dpi node to mt8183.
>
> Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
> Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
> Signed-off-by: Fabien Parent <fparent@baylibre.com>
> ---
> arch/arm64/boot/dts/mediatek/mt8183.dtsi | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> index ba4584faca5a..7c283c0b68b5 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> @@ -1443,6 +1443,17 @@ dsi0: dsi@14014000 {
> phy-names = "dphy";
> };
>
> + dpi0: dpi@14015000 {
> + compatible = "mediatek,mt8183-dpi";
> + reg = <0 0x14015000 0 0x1000>;
> + interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>;
> + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
> + clocks = <&mmsys CLK_MM_DPI_IF>,
> + <&mmsys CLK_MM_DPI_MM>,
> + <&apmixedsys CLK_APMIXED_TVDPLL>;
> + clock-names = "pixel", "engine", "pll";


We are missing the output port node, don't we?

Regards,
Matthias

> + };
> +
> mutex: mutex@14016000 {
> compatible = "mediatek,mt8183-disp-mutex";
> reg = <0 0x14016000 0 0x1000>;
>

\
 
 \ /
  Last update: 2021-11-17 18:33    [W:0.074 / U:1.344 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site