lkml.org 
[lkml]   [2021]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH RESEND] arm64: dts: mediatek: mt8516: remove 2 invalid i2c clocks
From


On 10/11/2021 20:35, Fabien Parent wrote:
> The two clocks "main-source" and "main-sel" are not present in the
> driver and not defined in the binding documentation. Remove them
> as they are not used and not described in the documentation.
>
> Signed-off-by: Fabien Parent <fparent@baylibre.com>

Applied to v5.16-next/dts64

thanks

> ---
> arch/arm64/boot/dts/mediatek/mt8516.dtsi | 27 ++++++------------------
> 1 file changed, 6 insertions(+), 21 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8516.dtsi b/arch/arm64/boot/dts/mediatek/mt8516.dtsi
> index bbe5a1419eff..d1b67c82d761 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8516.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8516.dtsi
> @@ -345,14 +345,9 @@ i2c0: i2c@11009000 {
> reg = <0 0x11009000 0 0x90>,
> <0 0x11000180 0 0x80>;
> interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_LOW>;
> - clocks = <&topckgen CLK_TOP_AHB_INFRA_D2>,
> - <&infracfg CLK_IFR_I2C0_SEL>,
> - <&topckgen CLK_TOP_I2C0>,
> + clocks = <&topckgen CLK_TOP_I2C0>,
> <&topckgen CLK_TOP_APDMA>;
> - clock-names = "main-source",
> - "main-sel",
> - "main",
> - "dma";
> + clock-names = "main", "dma";
> #address-cells = <1>;
> #size-cells = <0>;
> status = "disabled";
> @@ -364,14 +359,9 @@ i2c1: i2c@1100a000 {
> reg = <0 0x1100a000 0 0x90>,
> <0 0x11000200 0 0x80>;
> interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
> - clocks = <&topckgen CLK_TOP_AHB_INFRA_D2>,
> - <&infracfg CLK_IFR_I2C1_SEL>,
> - <&topckgen CLK_TOP_I2C1>,
> + clocks = <&topckgen CLK_TOP_I2C1>,
> <&topckgen CLK_TOP_APDMA>;
> - clock-names = "main-source",
> - "main-sel",
> - "main",
> - "dma";
> + clock-names = "main", "dma";
> #address-cells = <1>;
> #size-cells = <0>;
> status = "disabled";
> @@ -383,14 +373,9 @@ i2c2: i2c@1100b000 {
> reg = <0 0x1100b000 0 0x90>,
> <0 0x11000280 0 0x80>;
> interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>;
> - clocks = <&topckgen CLK_TOP_AHB_INFRA_D2>,
> - <&infracfg CLK_IFR_I2C2_SEL>,
> - <&topckgen CLK_TOP_I2C2>,
> + clocks = <&topckgen CLK_TOP_I2C2>,
> <&topckgen CLK_TOP_APDMA>;
> - clock-names = "main-source",
> - "main-sel",
> - "main",
> - "dma";
> + clock-names = "main", "dma";
> #address-cells = <1>;
> #size-cells = <0>;
> status = "disabled";
>

\
 
 \ /
  Last update: 2021-11-17 18:29    [W:0.031 / U:0.968 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site