lkml.org 
[lkml]   [2021]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 6/8] watchdog: Kconfig: fix help text indentation
On Thu, Nov 11, 2021 at 11:58:50PM +0100, Luca Ceresoli wrote:
> Some entries indent their help text with 1 tab + 1 space or 1 tab only
> instead of 1 tab + 2 spaces. Add the missing spaces.
>
> Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
> Acked-by: Randy Dunlap <rdunlap@infradead.org>

Reviewed-by: Guenter Roeck <linux@roeck-us.net>

> ---
>
> Changes in v3: none
> ---
> drivers/watchdog/Kconfig | 48 ++++++++++++++++++++--------------------
> 1 file changed, 24 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 9d222ba17ec6..a6d97f30325a 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -680,10 +680,10 @@ config MAX77620_WATCHDOG
> depends on MFD_MAX77620 || COMPILE_TEST
> select WATCHDOG_CORE
> help
> - This is the driver for the Max77620 watchdog timer.
> - Say 'Y' here to enable the watchdog timer support for
> - MAX77620 chips. To compile this driver as a module,
> - choose M here: the module will be called max77620_wdt.
> + This is the driver for the Max77620 watchdog timer.
> + Say 'Y' here to enable the watchdog timer support for
> + MAX77620 chips. To compile this driver as a module,
> + choose M here: the module will be called max77620_wdt.
>
> config IMX2_WDT
> tristate "IMX2+ Watchdog"
> @@ -1440,26 +1440,26 @@ config TQMX86_WDT
> depends on X86
> select WATCHDOG_CORE
> help
> - This is the driver for the hardware watchdog timer in the TQMX86 IO
> - controller found on some of their ComExpress Modules.
> + This is the driver for the hardware watchdog timer in the TQMX86 IO
> + controller found on some of their ComExpress Modules.
>
> - To compile this driver as a module, choose M here; the module
> - will be called tqmx86_wdt.
> + To compile this driver as a module, choose M here; the module
> + will be called tqmx86_wdt.
>
> - Most people will say N.
> + Most people will say N.
>
> config VIA_WDT
> tristate "VIA Watchdog Timer"
> depends on X86 && PCI
> select WATCHDOG_CORE
> help
> - This is the driver for the hardware watchdog timer on VIA
> - southbridge chipset CX700, VX800/VX820 or VX855/VX875.
> + This is the driver for the hardware watchdog timer on VIA
> + southbridge chipset CX700, VX800/VX820 or VX855/VX875.
>
> - To compile this driver as a module, choose M here; the module
> - will be called via_wdt.
> + To compile this driver as a module, choose M here; the module
> + will be called via_wdt.
>
> - Most people will say N.
> + Most people will say N.
>
> config W83627HF_WDT
> tristate "Watchdog timer for W83627HF/W83627DHG and compatibles"
> @@ -1745,10 +1745,10 @@ config BCM7038_WDT
> depends on HAS_IOMEM
> depends on ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
> help
> - Watchdog driver for the built-in hardware in Broadcom 7038 and
> - later SoCs used in set-top boxes. BCM7038 was made public
> - during the 2004 CES, and since then, many Broadcom chips use this
> - watchdog block, including some cable modem chips.
> + Watchdog driver for the built-in hardware in Broadcom 7038 and
> + later SoCs used in set-top boxes. BCM7038 was made public
> + during the 2004 CES, and since then, many Broadcom chips use this
> + watchdog block, including some cable modem chips.
>
> config IMGPDC_WDT
> tristate "Imagination Technologies PDC Watchdog Timer"
> @@ -2109,12 +2109,12 @@ config KEEMBAY_WATCHDOG
> depends on ARCH_KEEMBAY || (ARM64 && COMPILE_TEST)
> select WATCHDOG_CORE
> help
> - This option enable support for an In-secure watchdog timer driver for
> - Intel Keem Bay SoC. This WDT has a 32 bit timer and decrements in every
> - count unit. An interrupt will be triggered, when the count crosses
> - the threshold configured in the register.
> + This option enable support for an In-secure watchdog timer driver for
> + Intel Keem Bay SoC. This WDT has a 32 bit timer and decrements in every
> + count unit. An interrupt will be triggered, when the count crosses
> + the threshold configured in the register.
>
> - To compile this driver as a module, choose M here: the
> - module will be called keembay_wdt.
> + To compile this driver as a module, choose M here: the
> + module will be called keembay_wdt.
>
> endif # WATCHDOG

\
 
 \ /
  Last update: 2021-11-17 14:43    [W:0.105 / U:0.796 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site