lkml.org 
[lkml]   [2021]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/4] Remove clock-lanes DT property from CAMSS
Date
Changes since v1:
- Rob: Instead of documenting and fixing the use of the clock-lanes
property, remove it, since it is is not programmable and
therefore shouldn't be exposed in the DT.

Robert Foss (4):
media: camss: csiphy: Move to hardcode CSI Clock Lane number
media: dt-bindings: media: camss: Remove clock-lane property
arm64: dts: qcom: msm8916: Remove clock-lanes property from &camss
node
arm64: dts: qcom: sdm845-db845c: Remove clock-lanes property from
&camss node

.../bindings/media/qcom,msm8916-camss.yaml | 10 ---------
.../bindings/media/qcom,msm8996-camss.yaml | 20 ------------------
.../bindings/media/qcom,sdm660-camss.yaml | 20 ------------------
.../bindings/media/qcom,sdm845-camss.yaml | 17 ---------------
arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 2 --
arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 3 ---
.../qcom/camss/camss-csiphy-2ph-1-0.c | 19 +++++++++++++++--
.../qcom/camss/camss-csiphy-3ph-1-0.c | 17 ++++++++++++++-
.../media/platform/qcom/camss/camss-csiphy.c | 21 +------------------
.../media/platform/qcom/camss/camss-csiphy.h | 7 +++++++
10 files changed, 41 insertions(+), 95 deletions(-)

--
2.32.0

\
 
 \ /
  Last update: 2021-11-17 12:38    [W:0.057 / U:1.960 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site