lkml.org 
[lkml]   [2021]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] arm64: dts: ti: iot2050: Disable mcasp nodes at dtsi level
Date
Disable mcasp nodes 0-2 because several required properties
are not present in the dtsi file as they are board specific.
These nodes can be enabled via an overlay whenever required.

Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
---
arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
index 65da226847f4..c9407ed67866 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
@@ -731,3 +731,15 @@
&icssg2_mdio {
status = "disabled";
};
+
+&mcasp0 {
+ status = "disabled";
+};
+
+&mcasp1 {
+ status = "disabled";
+};
+
+&mcasp2 {
+ status = "disabled";
+};
--
2.17.1
\
 
 \ /
  Last update: 2021-11-17 06:39    [W:0.057 / U:0.404 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site