lkml.org 
[lkml]   [2021]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH -next v2] ethernet: renesas: Use div64_ul instead of do_div
Date
do_div() does a 64-by-32 division. Here the divisor is an
unsigned long which on some platforms is 64 bit wide. So use
div64_ul instead of do_div to avoid a possible truncation.

Eliminate the following coccicheck warning:
./drivers/net/ethernet/renesas/ravb_main.c:2492:1-7: WARNING:
do_div() does a 64-by-32 division, please consider using div64_ul instead.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
---

change in v2:
--Fixed warning message

drivers/net/ethernet/renesas/ravb_main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
index b4c597f..2b89710 100644
--- a/drivers/net/ethernet/renesas/ravb_main.c
+++ b/drivers/net/ethernet/renesas/ravb_main.c
@@ -2489,7 +2489,7 @@ static int ravb_set_gti(struct net_device *ndev)
return -EINVAL;

inc = 1000000000ULL << 20;
- do_div(inc, rate);
+ inc = div64_ul(inc, rate);

if (inc < GTI_TIV_MIN || inc > GTI_TIV_MAX) {
dev_err(dev, "gti.tiv increment 0x%llx is outside the range 0x%x - 0x%x\n",
--
1.8.3.1
\
 
 \ /
  Last update: 2021-11-18 03:59    [W:0.048 / U:0.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site