lkml.org 
[lkml]   [2021]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V3] pwm: Use div64_ul instead of do_div
Date
From: Changcheng Deng <deng.changcheng@zte.com.cn>

do_div() does a 64-by-32 division. Here the divisor is an unsigned long
which on some platforms is 64 bit wide. So use div64_ul instead of do_div
to avoid a possible truncation.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
---
drivers/pwm/pwm-atmel-hlcdc.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pwm/pwm-atmel-hlcdc.c b/drivers/pwm/pwm-atmel-hlcdc.c
index a43b2babc809..1ae3d73b9832 100644
--- a/drivers/pwm/pwm-atmel-hlcdc.c
+++ b/drivers/pwm/pwm-atmel-hlcdc.c
@@ -60,7 +60,7 @@ static int atmel_hlcdc_pwm_apply(struct pwm_chip *c, struct pwm_device *pwm,
return -EINVAL;

clk_period_ns = (u64)NSEC_PER_SEC * 256;
- do_div(clk_period_ns, clk_freq);
+ clk_period_ns = div64_ul(clk_period_ns, clk_freq);
}

/* Errata: cannot use slow clk on some IP revisions */
@@ -72,7 +72,7 @@ static int atmel_hlcdc_pwm_apply(struct pwm_chip *c, struct pwm_device *pwm,
return -EINVAL;

clk_period_ns = (u64)NSEC_PER_SEC * 256;
- do_div(clk_period_ns, clk_freq);
+ clk_period_ns = div64_ul(clk_period_ns, clk_freq);
}

for (pres = 0; pres <= ATMEL_HLCDC_PWMPS_MAX; pres++) {
--
2.25.1
\
 
 \ /
  Last update: 2021-11-18 03:54    [W:0.070 / U:1.408 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site