lkml.org 
[lkml]   [2021]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 09/16] reset: starfive-jh7100: Add StarFive JH7100 reset driver
On Tue, Nov 16, 2021 at 5:06 PM Emil Renner Berthing <kernel@esmil.dk> wrote:
>
> Add a driver for the StarFive JH7100 reset controller.

Thanks!
Couple of minor remarks below and take my
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>

> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
> ---
> MAINTAINERS | 7 +
> drivers/reset/Kconfig | 7 +
> drivers/reset/Makefile | 1 +
> drivers/reset/reset-starfive-jh7100.c | 176 ++++++++++++++++++++++++++
> 4 files changed, 191 insertions(+)
> create mode 100644 drivers/reset/reset-starfive-jh7100.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 2548ef1f8246..1152f5d94690 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -18137,6 +18137,13 @@ F: Documentation/devicetree/bindings/clock/starfive,jh7100-clkgen.yaml
> F: drivers/clk/starfive/clk-starfive-jh7100.c
> F: include/dt-bindings/clock/starfive-jh7100.h
>
> +STARFIVE JH7100 RESET CONTROLLER DRIVER
> +M: Emil Renner Berthing <kernel@esmil.dk>
> +S: Maintained
> +F: Documentation/devicetree/bindings/reset/starfive,jh7100-reset.yaml
> +F: drivers/reset/reset-starfive-jh7100.c
> +F: include/dt-bindings/reset/starfive-jh7100.h
> +
> STATIC BRANCH/CALL
> M: Peter Zijlstra <peterz@infradead.org>
> M: Josh Poimboeuf <jpoimboe@redhat.com>
> diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
> index 85024eb1d2ea..6f8ba0ddc05f 100644
> --- a/drivers/reset/Kconfig
> +++ b/drivers/reset/Kconfig
> @@ -224,6 +224,13 @@ config RESET_SOCFPGA
> This enables the reset driver for the SoCFPGA ARMv7 platforms. This
> driver gets initialized early during platform init calls.
>
> +config RESET_STARFIVE_JH7100
> + bool "StarFive JH7100 Reset Driver"
> + depends on SOC_STARFIVE || COMPILE_TEST
> + default SOC_STARFIVE
> + help
> + This enables the reset controller driver for the StarFive JH7100 SoC.
> +
> config RESET_SUNXI
> bool "Allwinner SoCs Reset Driver" if COMPILE_TEST && !ARCH_SUNXI
> default ARCH_SUNXI
> diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
> index 21d46d8869ff..bd0a97be18b5 100644
> --- a/drivers/reset/Makefile
> +++ b/drivers/reset/Makefile
> @@ -29,6 +29,7 @@ obj-$(CONFIG_RESET_RZG2L_USBPHY_CTRL) += reset-rzg2l-usbphy-ctrl.o
> obj-$(CONFIG_RESET_SCMI) += reset-scmi.o
> obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o
> obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o
> +obj-$(CONFIG_RESET_STARFIVE_JH7100) += reset-starfive-jh7100.o
> obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
> obj-$(CONFIG_RESET_TI_SCI) += reset-ti-sci.o
> obj-$(CONFIG_RESET_TI_SYSCON) += reset-ti-syscon.o
> diff --git a/drivers/reset/reset-starfive-jh7100.c b/drivers/reset/reset-starfive-jh7100.c
> new file mode 100644
> index 000000000000..2f7615cbf1dc
> --- /dev/null
> +++ b/drivers/reset/reset-starfive-jh7100.c
> @@ -0,0 +1,176 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Reset driver for the StarFive JH7100 SoC
> + *
> + * Copyright (C) 2021 Emil Renner Berthing <kernel@esmil.dk>
> + */
> +
> +#include <linux/bitmap.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset-controller.h>
> +#include <linux/spinlock.h>
> +
> +#include <dt-bindings/reset/starfive-jh7100.h>
> +
> +/* register offsets */
> +#define JH7100_RESET_ASSERT0 0x00
> +#define JH7100_RESET_ASSERT1 0x04
> +#define JH7100_RESET_ASSERT2 0x08
> +#define JH7100_RESET_ASSERT3 0x0c
> +#define JH7100_RESET_STATUS0 0x10
> +#define JH7100_RESET_STATUS1 0x14
> +#define JH7100_RESET_STATUS2 0x18
> +#define JH7100_RESET_STATUS3 0x1c

> +#if BITS_PER_LONG == 64
> +#define jh7100_reset_read readq
> +#define jh7100_reset_write writeq
> +#else
> +#define jh7100_reset_read readl
> +#define jh7100_reset_write writel
> +#endif

No need, just use always readq() / writeq() and include io-64-nonatomic-lo-hi

> +/*
> + * Writing a 1 to the n'th bit of the m'th ASSERT register asserts
> + * line 32m + n, and writing a 0 deasserts the same line.
> + * Most reset lines have their status inverted so a 0 bit in the STATUS
> + * register means the line is asserted and a 1 means it's deasserted. A few
> + * lines don't though, so store the expected value of the status registers when
> + * all lines are asserted.
> + */
> +static const DECLARE_BITMAP(jh7100_reset_asserted, 4 * 32) = {
> + BITMAP_FROM_U64(BIT_ULL_MASK(JH7100_RST_U74) |
> + BIT_ULL_MASK(JH7100_RST_VP6_DRESET) |
> + BIT_ULL_MASK(JH7100_RST_VP6_BRESET) |
> + BIT_ULL_MASK(JH7100_RST_HIFI4_DRESET) |
> + BIT_ULL_MASK(JH7100_RST_HIFI4_BRESET)),
> + BITMAP_FROM_U64(BIT_ULL_MASK(JH7100_RST_E24)),
> +};
> +
> +struct jh7100_reset {
> + struct reset_controller_dev rcdev;
> + /* protect registers against concurrent read-modify-write */
> + spinlock_t lock;
> + void __iomem *base;
> +};
> +
> +static inline struct jh7100_reset *
> +jh7100_reset_from(struct reset_controller_dev *rcdev)
> +{
> + return container_of(rcdev, struct jh7100_reset, rcdev);
> +}
> +
> +static int jh7100_reset_update(struct reset_controller_dev *rcdev,
> + unsigned long id, bool assert)
> +{
> + struct jh7100_reset *data = jh7100_reset_from(rcdev);
> + unsigned long offset = id / BITS_PER_LONG;
> + void __iomem *reg_assert = data->base + JH7100_RESET_ASSERT0 + offset * sizeof(long);
> + void __iomem *reg_status = data->base + JH7100_RESET_STATUS0 + offset * sizeof(long);
> + unsigned long mask = BIT_MASK(id);

It's better to group offset and mask, so it will give a hint to human
and compiler that
'/' + '%' can be optimized to one assembly instructions on some
architectures (in case of compile-test or new RISC-V types, I dunno if
they have it now).

And use BIT_WORD() for offset calculation. Same for the above function.

> + unsigned long done = jh7100_reset_asserted[offset] & mask;
> + unsigned long value;
> + unsigned long flags;
> + int ret;
> +
> + if (!assert)
> + done ^= mask;
> +
> + spin_lock_irqsave(&data->lock, flags);
> +
> + value = jh7100_reset_read(reg_assert);
> + if (assert)
> + value |= mask;
> + else
> + value &= ~mask;
> + jh7100_reset_write(value, reg_assert);
> +
> + /* if the associated clock is gated, deasserting might otherwise hang forever */
> + ret = readx_poll_timeout_atomic(jh7100_reset_read, reg_status, value,
> + (value & mask) == done, 0, 1000);
> +
> + spin_unlock_irqrestore(&data->lock, flags);
> + return ret;
> +}
> +
> +static int jh7100_reset_assert(struct reset_controller_dev *rcdev,
> + unsigned long id)
> +{
> + return jh7100_reset_update(rcdev, id, true);
> +}
> +
> +static int jh7100_reset_deassert(struct reset_controller_dev *rcdev,
> + unsigned long id)
> +{
> + return jh7100_reset_update(rcdev, id, false);
> +}
> +
> +static int jh7100_reset_reset(struct reset_controller_dev *rcdev,
> + unsigned long id)
> +{
> + int ret;
> +
> + ret = jh7100_reset_assert(rcdev, id);
> + if (ret)
> + return ret;
> +
> + return jh7100_reset_deassert(rcdev, id);
> +}
> +
> +static int jh7100_reset_status(struct reset_controller_dev *rcdev,
> + unsigned long id)
> +{
> + struct jh7100_reset *data = jh7100_reset_from(rcdev);
> + unsigned long offset = id / BITS_PER_LONG;
> + void __iomem *reg_status = data->base + JH7100_RESET_STATUS0 + offset * sizeof(long);
> + unsigned long value = jh7100_reset_read(reg_status);
> + unsigned long mask = BIT_MASK(id);
> +
> + return !((value ^ jh7100_reset_asserted[offset]) & mask);
> +}
> +
> +static const struct reset_control_ops jh7100_reset_ops = {
> + .assert = jh7100_reset_assert,
> + .deassert = jh7100_reset_deassert,
> + .reset = jh7100_reset_reset,
> + .status = jh7100_reset_status,
> +};
> +
> +static int __init jh7100_reset_probe(struct platform_device *pdev)
> +{
> + struct jh7100_reset *data;
> +
> + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
> + if (!data)
> + return -ENOMEM;
> +
> + data->base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(data->base))
> + return PTR_ERR(data->base);
> +
> + data->rcdev.ops = &jh7100_reset_ops;
> + data->rcdev.owner = THIS_MODULE;
> + data->rcdev.nr_resets = JH7100_RSTN_END;
> + data->rcdev.dev = &pdev->dev;
> + data->rcdev.of_node = pdev->dev.of_node;
> + spin_lock_init(&data->lock);
> +
> + return devm_reset_controller_register(&pdev->dev, &data->rcdev);
> +}
> +
> +static const struct of_device_id jh7100_reset_dt_ids[] = {
> + { .compatible = "starfive,jh7100-reset" },
> + { /* sentinel */ }
> +};
> +
> +static struct platform_driver jh7100_reset_driver = {
> + .driver = {
> + .name = "jh7100-reset",
> + .of_match_table = jh7100_reset_dt_ids,
> + .suppress_bind_attrs = true,
> + },
> +};
> +builtin_platform_driver_probe(jh7100_reset_driver, jh7100_reset_probe);
> --
> 2.33.1
>


--
With Best Regards,
Andy Shevchenko

\
 
 \ /
  Last update: 2021-11-16 17:02    [W:0.195 / U:0.556 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site