lkml.org 
[lkml]   [2021]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v10, 00/19] Support multi hardware decode using of_platform_populate
From
Date
Hi Ezequiel,

Thanks for you suggestion.
On Sun, 2021-11-14 at 19:04 -0300, Ezequiel Garcia wrote:
> Hi Yunfei,
>
> On Thu, 11 Nov 2021 at 01:15, Yunfei Dong <yunfei.dong@mediatek.com>
> wrote:
> >
> > This series adds support for multi hardware decode into mtk-vcodec,
> > by first adding use
> > of_platform_populate to manage each hardware information:
> > interrupt, clock, register
> > bases and power. Secondly add core work queue to deal with core
> > hardware message,
> > at the same time, add msg queue for different hardware share
> > messages. Lastly, the
> > architecture of different specs are not the same, using specs type
> > to separate them.
> >
> > This series has been tested with both MT8183 and MT8173. Decoding
> > was working for both chips.
> >
>
> How are you testing Decoding? If you are running some test suite, it
> would
> be good to add such information.
>
For 8183 and 8173, these patches don't have influence for them, can
work well.

These patches are used for mt8192 and 8195. We do cts/gts/stress test
to check our drivers.
> Are you testing some edge-cases such as parallel/concurrent decoding,
> removing the driver while streaming, and so on? This should help
> catch
> some typical issues.
>
> Thanks,
> Ezequiel
>
Thanks,
Yunfei Dong
> > Patches 1~3 rewrite get register bases and power on/off interface.
> > Patches 4 export decoder pm interfaces.
> > Patches 5 add to support 8192.
> > Patch 6 support multi hardware.
> > Patch 7 separate video encoder and decoder document
> > Patch 8-17 add interfaces to support core hardware.
> > Patch 18-19 remove mtk_vcodec_release_dec/enc_pm interfaces.
> > ---
> > changes compared with v9:
> > - need not to build ko, just export pm interfaces for patch 04/19.
> > - fix comments for patch 06/19
> >
> > changes compared with v8:
> > - add new patch 18~19 to remove mtk_vcodec_release_de/enc_pm
> > interfaces.
> > - fix spelling mistakes for patch 17/19
> > - fix yaml comments for patch 15/19
> >
> > Changes compared with v7:
> > - add new patch 4 to build decoder pm file as module
> > - add new patch 5 to support 8192
> > - fix comments for patch 6/17
> > - change some logic for using work queue instead of create thread
> > for core hardware decode for patch 10/17
> > - using work queue for hardware decode instead of create thread for
> > patch 13/17
> > - add returen value for patch 14/17
> > - fix yaml check fail 15/17
> >
> > Changes compared with v6:
> > - Use of_platform_populate to manage multi hardware, not component
> > framework for patch 4/15
> > - Re-write dtsi document for hardware architecture changed for
> > patch 13/15 -The dtsi will write like below in patch 13/15:
> > vcodec_dec: vcodec_dec@16000000 {
> > compatible = "mediatek,mt8192-vcodec-dec";
> > #address-cells = <2>;
> > #size-cells = <2>;
> > ranges;
> > reg = <0 0x16000000 0 0x1000>; /* VDEC_SYS */
> > mediatek,scp = <&scp>;
> > iommus = <&iommu0 M4U_PORT_L4_VDEC_MC_EXT>;
> > dma-ranges = <0x1 0x0 0x0 0x40000000 0x0 0xfff00000>;
> > vcodec_lat {
> > compatible = "mediatek,mtk-vcodec-lat";
> > reg = <0 0x16010000 0 0x800>; /*
> > VDEC_MISC */
> > reg-name = "reg-misc";
> > interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH 0>;
> > iommus = <&iommu0 M4U_PORT_L5_VDEC_LAT0_VLD_EXT>,
> > <&iommu0 M4U_PORT_L5_VDEC_LAT0_VLD2_EXT>,
> > <&iommu0 M4U_PORT_L5_VDEC_LAT0_AVC_MV_EXT>,
> > <&iommu0 M4U_PORT_L5_VDEC_LAT0_PRED_RD_EXT>,
> > <&iommu0 M4U_PORT_L5_VDEC_LAT0_TILE_EXT>,
> > <&iommu0 M4U_PORT_L5_VDEC_LAT0_WDMA_EXT>,
> > <&iommu0 M4U_PORT_L5_VDEC_LAT0_RG_CTRL_DMA_EXT>,
> > <&iommu0 M4U_PORT_L5_VDEC_UFO_ENC_EXT>;
> > clocks = <&topckgen CLK_TOP_VDEC_SEL>,
> > <&vdecsys_soc CLK_VDEC_SOC_VDEC>,
> > <&vdecsys_soc CLK_VDEC_SOC_LAT>,
> > <&vdecsys_soc CLK_VDEC_SOC_LARB1>,
> > <&topckgen CLK_TOP_MAINPLL_D4>;
> > clock-names = "vdec-sel", "vdec-soc-vdec", "vdec-soc-
> > lat",
> > "vdec-vdec", "vdec-top";
> > assigned-clocks = <&topckgen CLK_TOP_VDEC_SEL>;
> > assigned-clock-parents = <&topckgen
> > CLK_TOP_MAINPLL_D4>;
> > power-domains = <&spm MT8192_POWER_DOMAIN_VDEC>;
> > };
> >
> > vcodec_core {
> > compatible = "mediatek,mtk-vcodec-core";
> > reg = <0 0x16025000 0 0x1000>; /*
> > VDEC_CORE_MISC */
> > reg-names = "reg-misc";
> > interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH 0>;
> > iommus = <&iommu0 M4U_PORT_L4_VDEC_MC_EXT>,
> > <&iommu0 M4U_PORT_L4_VDEC_UFO_EXT>,
> > <&iommu0 M4U_PORT_L4_VDEC_PP_EXT>,
> > <&iommu0 M4U_PORT_L4_VDEC_PRED_RD_EXT>,
> > <&iommu0 M4U_PORT_L4_VDEC_PRED_WR_EXT>,
> > <&iommu0 M4U_PORT_L4_VDEC_PPWRAP_EXT>,
> > <&iommu0 M4U_PORT_L4_VDEC_TILE_EXT>,
> > <&iommu0 M4U_PORT_L4_VDEC_VLD_EXT>,
> > <&iommu0 M4U_PORT_L4_VDEC_VLD2_EXT>,
> > <&iommu0 M4U_PORT_L4_VDEC_AVC_MV_EXT>,
> > <&iommu0 M4U_PORT_L4_VDEC_RG_CTRL_DMA_EXT>;
> > clocks = <&topckgen CLK_TOP_VDEC_SEL>,
> > <&vdecsys CLK_VDEC_VDEC>,
> > <&vdecsys CLK_VDEC_LAT>,
> > <&vdecsys CLK_VDEC_LARB1>,
> > <&topckgen CLK_TOP_MAINPLL_D4>;
> > clock-names = "vdec-sel", "vdec-soc-vdec", "vdec-soc-
> > lat",
> > "vdec-vdec", "vdec-top";
> > assigned-clocks = <&topckgen CLK_TOP_VDEC_SEL>;
> > assigned-clock-parents = <&topckgen
> > CLK_TOP_MAINPLL_D4>;
> > power-domains = <&spm MT8192_POWER_DOMAIN_VDEC2>;
> > };
> > };
> >
> > Changes compared with v5:
> > - Add decoder hardware block diagram for patch 13/15
> >
> > Changes compared with v4:
> > - Fix comments for patch 4/15
> > >> + if (dev->is_comp_supported) {
> > >> + ret = mtk_vcodec_init_master(dev);
> > >> + if (ret < 0)
> > >> + goto err_component_match;
> > >> + } else {
> > >> + platform_set_drvdata(pdev, dev);
> > >> + }
> > Fix platform_set_drvdata.
> > - Fix build error for patch 9/15
> > - Add depend patch in case of error header file for patch 13/15
> >
> > Changes compared with v3:
> > - Fix return value for patch 1/15
> > - Fix comments for patch 4/15
> > > Looking up "mediatek,mtk-vcodec-core" to determine if it uses
> > component framwork sounds like...
> > Add prameter in pdata, for all platform will use compoent after
> > mt8183
> >
> > >> + if (dev->is_comp_supported) {
> > >> + ret = mtk_vcodec_init_master(dev);
> > >> + if (ret < 0)
> > >> + goto err_component_match;
> > >> + } else {
> > >> + platform_set_drvdata(pdev, dev);
> > >> + }
> > > + Has asked the same question in [1]. Why it removes the
> > > +platform_set_drvdata() above? mtk_vcodec_init_master() also
> > calls platform_set_drvdata().
> > Must call component_master_add_with_match after
> > platform_set_drvdata for component architecture.
> > - Fix yaml files check fail for patch 5/15
> > - Fix yaml file check fail for patch 14/15
> >
> > Changes compared with v1:
> > - Fix many comments for patch 3/14
> > - Remove unnecessary code for patch 4/14
> > - Using enum mtk_vdec_hw_count instead of magic numbers for patch
> > 6/14
> > - Reconstructed get/put lat buffer for lat and core hardware for
> > patch 7/14
> > - Using yaml format to instead of txt file for patch 12/14
> >
> > Yunfei Dong (19):
> > media: mtk-vcodec: Get numbers of register bases from DT
> > media: mtk-vcodec: Align vcodec wake up interrupt interface
> > media: mtk-vcodec: Refactor vcodec pm interface
> > media: mtk-vcodec: export decoder pm functions
> > media: mtk-vcodec: Support MT8192
> > media: mtk-vcodec: Manage multi hardware information
> > dt-bindings: media: mtk-vcodec: Separate video encoder and
> > decoder
> > dt-bindings
> > media: mtk-vcodec: Use pure single core for MT8183
> > media: mtk-vcodec: Add irq interface for multi hardware
> > media: mtk-vcodec: Add msg queue feature for lat and core
> > architecture
> > media: mtk-vcodec: Generalize power and clock on/off interfaces
> > media: mtk-vcodec: Add new interface to lock different hardware
> > media: mtk-vcodec: Add work queue for core hardware decode
> > media: mtk-vcodec: Support 34bits dma address for vdec
> > dt-bindings: media: mtk-vcodec: Adds decoder dt-bindings for
> > mt8192
> > media: mtk-vcodec: Add core dec and dec end ipi msg
> > media: mtk-vcodec: Use codec type to separate different hardware
> > media: mtk-vcodec: Remove mtk_vcodec_release_dec_pm
> > media: mtk-vcodec: Remove mtk_vcodec_release_enc_pm
> >
> > .../media/mediatek,vcodec-decoder.yaml | 176 +++++++++++
> > .../media/mediatek,vcodec-encoder.yaml | 187 ++++++++++++
> > .../media/mediatek,vcodec-subdev-decoder.yaml | 261
> > ++++++++++++++++
> > .../bindings/media/mediatek-vcodec.txt | 131 --------
> > drivers/media/platform/mtk-vcodec/Makefile | 6 +-
> > .../platform/mtk-vcodec/mtk_vcodec_dec.c | 4 +-
> > .../platform/mtk-vcodec/mtk_vcodec_dec.h | 1 +
> > .../platform/mtk-vcodec/mtk_vcodec_dec_drv.c | 219 +++++++++++---
> > .../platform/mtk-vcodec/mtk_vcodec_dec_hw.c | 172 +++++++++++
> > .../platform/mtk-vcodec/mtk_vcodec_dec_hw.h | 55 ++++
> > .../platform/mtk-vcodec/mtk_vcodec_dec_pm.c | 104 +++++--
> > .../platform/mtk-vcodec/mtk_vcodec_dec_pm.h | 12 +-
> > .../mtk-vcodec/mtk_vcodec_dec_stateful.c | 2 +
> > .../mtk-vcodec/mtk_vcodec_dec_stateless.c | 20 ++
> > .../platform/mtk-vcodec/mtk_vcodec_drv.h | 75 ++++-
> > .../platform/mtk-vcodec/mtk_vcodec_enc_drv.c | 21 +-
> > .../platform/mtk-vcodec/mtk_vcodec_enc_pm.c | 10 +-
> > .../platform/mtk-vcodec/mtk_vcodec_enc_pm.h | 3 +-
> > .../platform/mtk-vcodec/mtk_vcodec_intr.c | 27 +-
> > .../platform/mtk-vcodec/mtk_vcodec_intr.h | 4 +-
> > .../platform/mtk-vcodec/mtk_vcodec_util.c | 87 +++++-
> > .../platform/mtk-vcodec/mtk_vcodec_util.h | 8 +-
> > .../platform/mtk-vcodec/vdec/vdec_h264_if.c | 2 +-
> > .../mtk-vcodec/vdec/vdec_h264_req_if.c | 2 +-
> > .../platform/mtk-vcodec/vdec/vdec_vp8_if.c | 2 +-
> > .../platform/mtk-vcodec/vdec/vdec_vp9_if.c | 2 +-
> > .../media/platform/mtk-vcodec/vdec_drv_if.c | 21 +-
> > .../media/platform/mtk-vcodec/vdec_ipi_msg.h | 16 +-
> > .../platform/mtk-vcodec/vdec_msg_queue.c | 286
> > ++++++++++++++++++
> > .../platform/mtk-vcodec/vdec_msg_queue.h | 148 +++++++++
> > .../media/platform/mtk-vcodec/vdec_vpu_if.c | 46 ++-
> > .../media/platform/mtk-vcodec/vdec_vpu_if.h | 22 ++
> > .../platform/mtk-vcodec/venc/venc_h264_if.c | 2 +-
> > .../platform/mtk-vcodec/venc/venc_vp8_if.c | 2 +-
> > 34 files changed, 1841 insertions(+), 295 deletions(-)
> > create mode 100644
> > Documentation/devicetree/bindings/media/mediatek,vcodec-
> > decoder.yaml
> > create mode 100644
> > Documentation/devicetree/bindings/media/mediatek,vcodec-
> > encoder.yaml
> > create mode 100644
> > Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-
> > decoder.yaml
> > delete mode 100644
> > Documentation/devicetree/bindings/media/mediatek-vcodec.txt
> > create mode 100644 drivers/media/platform/mtk-
> > vcodec/mtk_vcodec_dec_hw.c
> > create mode 100644 drivers/media/platform/mtk-
> > vcodec/mtk_vcodec_dec_hw.h
> > create mode 100644 drivers/media/platform/mtk-
> > vcodec/vdec_msg_queue.c
> > create mode 100644 drivers/media/platform/mtk-
> > vcodec/vdec_msg_queue.h
> >
> > --
> > 2.25.1
> >
\
 
 \ /
  Last update: 2021-11-16 12:44    [W:0.159 / U:0.820 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site