lkml.org 
[lkml]   [2021]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] backlight: ili922x: fix kernel-doc warnings & notation
Date
Convert function-like macro comments to kernel-doc notation and
fix other kernel-doc warnings:

drivers/video/backlight/ili922x.c:85: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* START_BYTE(id, rs, rw)
drivers/video/backlight/ili922x.c:118: warning: expecting prototype for CHECK_FREQ_REG(spi_device s, spi_transfer x)(). Prototype was for CHECK_FREQ_REG() instead

ili922x.c:92: warning: contents before sections
ili922x.c:150: warning: No description found for return value of 'ili922x_read_status'
ili922x.c:193: warning: No description found for return value of 'ili922x_read'
ili922x.c:247: warning: No description found for return value of 'ili922x_write'
ili922x.c:353: warning: No description found for return value of 'ili922x_poweron'
ili922x.c:382: warning: No description found for return value of 'ili922x_poweroff'

Fixes: 4cfbfa971478 ("video: backlight: add ili922x lcd driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: Stefano Babic <sbabic@denx.de>
Cc: Anatolij Gustschin <agust@denx.de>
---
v2: add periods at end of sentences so that the generated documentation
flows correctly. (thanks, Daniel)

drivers/video/backlight/ili922x.c | 29 ++++++++++++++++++----------
1 file changed, 19 insertions(+), 10 deletions(-)

--- linux-next-20211115.orig/drivers/video/backlight/ili922x.c
+++ linux-next-20211115/drivers/video/backlight/ili922x.c
@@ -82,13 +82,7 @@
#define START_RW_READ 1

/**
- * START_BYTE(id, rs, rw)
- *
- * Set the start byte according to the required operation.
- * The start byte is defined as:
- * ----------------------------------
- * | 0 | 1 | 1 | 1 | 0 | ID | RS | RW |
- * ----------------------------------
+ * START_BYTE() - Set the start byte according to the required operation.
* @id: display's id as set by the manufacturer
* @rs: operation type bit, one of:
* - START_RS_INDEX set the index register
@@ -96,14 +90,19 @@
* @rw: read/write operation
* - START_RW_WRITE write
* - START_RW_READ read
+ *
+ * The start byte is defined as:
+ * ----------------------------------
+ * | 0 | 1 | 1 | 1 | 0 | ID | RS | RW |
+ * ----------------------------------
*/
#define START_BYTE(id, rs, rw) \
(0x70 | (((id) & 0x01) << 2) | (((rs) & 0x01) << 1) | ((rw) & 0x01))

/**
- * CHECK_FREQ_REG(spi_device s, spi_transfer x) - Check the frequency
- * for the SPI transfer. According to the datasheet, the controller
- * accept higher frequency for the GRAM transfer, but it requires
+ * CHECK_FREQ_REG() - Check the frequency for the SPI transfer.
+ * According to the datasheet, the controller
+ * accepts higher frequency for the GRAM transfer, but it requires
* lower frequency when the registers are read/written.
* The macro sets the frequency in the spi_transfer structure if
* the frequency exceeds the maximum value.
@@ -145,6 +144,8 @@ struct ili922x {
* ili922x_read_status - read status register from display
* @spi: spi device
* @rs: output value
+ *
+ * Return: %0 on success or a negative error code on failure
*/
static int ili922x_read_status(struct spi_device *spi, u16 *rs)
{
@@ -188,6 +189,8 @@ static int ili922x_read_status(struct sp
* @spi: spi device
* @reg: offset of the register to be read
* @rx: output value
+ *
+ * Return: %0 on success or a negative error code on failure
*/
static int ili922x_read(struct spi_device *spi, u8 reg, u16 *rx)
{
@@ -242,6 +245,8 @@ static int ili922x_read(struct spi_devic
* @spi: struct spi_device *
* @reg: offset of the register to be written
* @value: value to be written
+ *
+ * Return: %0 on success or a negative error code on failure
*/
static int ili922x_write(struct spi_device *spi, u8 reg, u16 value)
{
@@ -348,6 +353,8 @@ static void set_write_to_gram_reg(struct
* The sequence to turn on the display is taken from
* the datasheet and/or the example code provided by the
* manufacturer.
+ *
+ * Return: %0 on success or a negative value on failure
*/
static int ili922x_poweron(struct spi_device *spi)
{
@@ -377,6 +384,8 @@ static int ili922x_poweron(struct spi_de
/**
* ili922x_poweroff - turn the display off
* @spi: spi device
+ *
+ * Return: %0 on success or a negative value on failure
*/
static int ili922x_poweroff(struct spi_device *spi)
{
\
 
 \ /
  Last update: 2021-11-16 06:22    [W:0.029 / U:1.332 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site