lkml.org 
[lkml]   [2021]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v17 7/7] usb: Specify dependencies on USB_XHCI_PLATFORM with 'depends on'
On Tue, Nov 16, 2021 at 12:07:39PM -0800, Matthias Kaehlcke wrote:
> Some USB controller drivers that depend on the xhci-plat driver
> specify this dependency using 'select' in Kconfig. This is not
> recommended for symbols that have other dependencies as it may
> lead to invalid configurations. Use 'depends on' to specify the
> dependency instead of 'select'.
>
> For dwc3 specify the dependency on USB_XHCI_PLATFORM in
> USB_DWC3_HOST and USB_DWC3_DUAL_ROLE. Also adjust the
> dependencies of USB_DWC3_CORE to make sure that at least one
> of USB_DWC3_HOST, USB_DWC3_GADGET or USB_DWC3_DUAL_ROLE can be
> selected.
>
> Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
> Reviewed-by: Roger Quadros <rogerq@kernel.org>
> Reviewed-by: Douglas Anderson <dianders@chromium.org>
> ---
>
> Changes in v17:
> - removed explicit dependency on USB from USB_DWC3
> - added 'Reviewed-by' tags from Roger and Doug
>
> Changes in v16:
> - none
>
> Changes in v15:
> - adjusted dependencies of USB_DWC3_CORE to make sure it can only
> be enabled when at least one of USB_DWC3_HOST, USB_DWC3_GADGET
> or USB_DWC3_DUAL_ROLE is selectable
> - updated commit message
>
> Changes in v14:
> - none
>
> Changes in v13:
> - patch added to the series

> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
> index d1d926f8f9c2..e5e612f143a1 100644
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -80,7 +80,7 @@ config USB_XHCI_MTK
>
> config USB_XHCI_MVEBU
> tristate "xHCI support for Marvell Armada 375/38x/37xx"
> - select USB_XHCI_PLATFORM
> + depends on USB_XHCI_PLATFORM
> depends on HAS_IOMEM
> depends on ARCH_MVEBU || COMPILE_TEST
> help
> @@ -112,9 +112,9 @@ config USB_EHCI_BRCMSTB
> config USB_BRCMSTB
> tristate "Broadcom STB USB support"
> depends on (ARCH_BRCMSTB && PHY_BRCM_USB) || COMPILE_TEST
> + depends on !USB_XHCI_HCD || USB_XHCI_PLATFORM
> select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
> select USB_EHCI_BRCMSTB if USB_EHCI_HCD
> - select USB_XHCI_PLATFORM if USB_XHCI_HCD
> help
> Enables support for XHCI, EHCI and OHCI host controllers
> found in Broadcom STB SoC's.

It should be pointed out that this now requires people with xHCI systems
to actively turn on CONFIG_USB_XHCI_PLATFORM before they can enable
CONFIG_USB_BRCMSTB. Before, that was not necessary. Some users might
get confused and not realize what is needed. Perhaps something should
be added to the "help" text.

Alan Stern

\
 
 \ /
  Last update: 2021-11-17 03:22    [W:0.177 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site