lkml.org 
[lkml]   [2021]   [Nov]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: PROBLEM: [drivers/ata] Read log page failed (boot error message)
There is no error message with vanilla 5.15.2 + this patch.
Warning message about missing support for
ATA Identify Device Log instead. Seems well.
Relevant dmesg part:
ata1: SATA max UDMA/133 abar m2048@0xd8806000 port 0xd8806100 irq 19
ata2: SATA max UDMA/133 abar m2048@0xd8806000 port 0xd8806180 irq 19
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: SATA max UDMA/133 abar m2048@0xd8806000 port 0xd8806380 irq 19
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata6.00: ATA-9: WDC WD5000LPLX-75ZNTT0, 03.01A03, max UDMA/133
ata6.00: ATA Identify Device Log not supported
ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata1.00: ATAPI: TSSTcorp CDDVDW TS-L633F, TM02, max UDMA/100
ata6.00: ATA Identify Device Log not supported
ata6.00: configured for UDMA/133
ata1.00: configured for UDMA/100
scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633F TM02 PQ: 0 ANSI: 5
scsi 5:0:0:0: Direct-Access ATA WDC WD5000LPLX-7 1A03 PQ: 0 ANSI: 5

\
 
 \ /
  Last update: 2021-11-15 14:28    [W:0.058 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site