lkml.org 
[lkml]   [2021]   [Nov]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 03/11] mmc: bcm2835: stop setting chan_config->slave_id
On Mon, 15 Nov 2021 at 09:55, Arnd Bergmann <arnd@kernel.org> wrote:
>
> From: Arnd Bergmann <arnd@arndb.de>
>
> The field is not interpreted by the DMA engine driver, as all the data
> is passed from devicetree instead. Remove the assignment so the field
> can eventually be deleted.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Acked-by: Ulf Hansson <ulf.hansson@linaro.org>

Kind regards
Uffe

> ---
> drivers/mmc/host/bcm2835.c | 2 --
> 1 file changed, 2 deletions(-)
>
> diff --git a/drivers/mmc/host/bcm2835.c b/drivers/mmc/host/bcm2835.c
> index 8c2361e66277..463b707d9e99 100644
> --- a/drivers/mmc/host/bcm2835.c
> +++ b/drivers/mmc/host/bcm2835.c
> @@ -1293,14 +1293,12 @@ static int bcm2835_add_host(struct bcm2835_host *host)
>
> host->dma_cfg_tx.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
> host->dma_cfg_tx.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
> - host->dma_cfg_tx.slave_id = 13; /* DREQ channel */
> host->dma_cfg_tx.direction = DMA_MEM_TO_DEV;
> host->dma_cfg_tx.src_addr = 0;
> host->dma_cfg_tx.dst_addr = host->phys_addr + SDDATA;
>
> host->dma_cfg_rx.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
> host->dma_cfg_rx.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
> - host->dma_cfg_rx.slave_id = 13; /* DREQ channel */
> host->dma_cfg_rx.direction = DMA_DEV_TO_MEM;
> host->dma_cfg_rx.src_addr = host->phys_addr + SDDATA;
> host->dma_cfg_rx.dst_addr = 0;
> --
> 2.30.2
>

\
 
 \ /
  Last update: 2021-11-15 14:10    [W:0.304 / U:1.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site