lkml.org 
[lkml]   [2021]   [Nov]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v6 4/8] arm64: dts: imx8mm: Add the pcie phy support
    Date
    Add the PCIe PHY support on iMX8MM platforms.

    Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
    Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
    Reviewed-by: Tim Harvey <tharvey@gateworks.com>
    Tested-by: Tim Harvey <tharvey@gateworks.com>
    ---
    arch/arm64/boot/dts/freescale/imx8mm.dtsi | 13 +++++++++++++
    1 file changed, 13 insertions(+)

    diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
    index c2f3f118f82e..0844f3144887 100644
    --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
    +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
    @@ -1135,6 +1135,19 @@ usbmisc2: usbmisc@32e50200 {
    reg = <0x32e50200 0x200>;
    };

    + pcie_phy: pcie-phy@32f00000 {
    + compatible = "fsl,imx8mm-pcie-phy";
    + reg = <0x32f00000 0x10000>;
    + clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
    + clock-names = "ref";
    + assigned-clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
    + assigned-clock-rates = <100000000>;
    + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_100M>;
    + resets = <&src IMX8MQ_RESET_PCIEPHY>;
    + reset-names = "pciephy";
    + #phy-cells = <0>;
    + status = "disabled";
    + };
    };

    dma_apbh: dma-controller@33000000 {
    --
    2.25.1
    \
     
     \ /
      Last update: 2021-11-16 03:47    [W:2.479 / U:0.040 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site