lkml.org 
[lkml]   [2021]   [Nov]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.10 305/575] EDAC/amd64: Handle three rank interleaving mode
Date
From: Yazen Ghannam <yazen.ghannam@amd.com>

[ Upstream commit 9f4873fb6af7966de8fcbd95c36b61351c1c4b1f ]

AMD Rome systems and later support interleaving between three identical
ranks within a channel.

Check for this mode by counting the number of enabled chip selects and
comparing their masks. If there are exactly three enabled chip selects
and their masks are identical, then three rank interleaving is enabled.

The size of a rank is determined from its mask value. However, three
rank interleaving doesn't follow the method of swapping an interleave
bit with the most significant bit. Rather, the interleave bit is flipped
and the most significant bit remains the same. There is only a single
interleave bit in this case.

Account for this when determining the chip select size by keeping the
most significant bit at its original value and ignoring any zero bits.
This will return a full bitmask in [MSB:1].

Fixes: e53a3b267fb0 ("EDAC/amd64: Find Chip Select memory size using Address Mask")
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211005154419.2060504-1-yazen.ghannam@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/edac/amd64_edac.c | 22 +++++++++++++++++++++-
1 file changed, 21 insertions(+), 1 deletion(-)

diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index b36d5879b91e0..f5635dfa9acf6 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -786,12 +786,14 @@ static void debug_dump_dramcfg_low(struct amd64_pvt *pvt, u32 dclr, int chan)
#define CS_ODD_PRIMARY BIT(1)
#define CS_EVEN_SECONDARY BIT(2)
#define CS_ODD_SECONDARY BIT(3)
+#define CS_3R_INTERLEAVE BIT(4)

#define CS_EVEN (CS_EVEN_PRIMARY | CS_EVEN_SECONDARY)
#define CS_ODD (CS_ODD_PRIMARY | CS_ODD_SECONDARY)

static int f17_get_cs_mode(int dimm, u8 ctrl, struct amd64_pvt *pvt)
{
+ u8 base, count = 0;
int cs_mode = 0;

if (csrow_enabled(2 * dimm, ctrl, pvt))
@@ -804,6 +806,20 @@ static int f17_get_cs_mode(int dimm, u8 ctrl, struct amd64_pvt *pvt)
if (csrow_sec_enabled(2 * dimm + 1, ctrl, pvt))
cs_mode |= CS_ODD_SECONDARY;

+ /*
+ * 3 Rank inteleaving support.
+ * There should be only three bases enabled and their two masks should
+ * be equal.
+ */
+ for_each_chip_select(base, ctrl, pvt)
+ count += csrow_enabled(base, ctrl, pvt);
+
+ if (count == 3 &&
+ pvt->csels[ctrl].csmasks[0] == pvt->csels[ctrl].csmasks[1]) {
+ edac_dbg(1, "3R interleaving in use.\n");
+ cs_mode |= CS_3R_INTERLEAVE;
+ }
+
return cs_mode;
}

@@ -1612,10 +1628,14 @@ static int f17_addr_mask_to_cs_size(struct amd64_pvt *pvt, u8 umc,
*
* The MSB is the number of bits in the full mask because BIT[0] is
* always 0.
+ *
+ * In the special 3 Rank interleaving case, a single bit is flipped
+ * without swapping with the most significant bit. This can be handled
+ * by keeping the MSB where it is and ignoring the single zero bit.
*/
msb = fls(addr_mask_orig) - 1;
weight = hweight_long(addr_mask_orig);
- num_zero_bits = msb - weight;
+ num_zero_bits = msb - weight - !!(cs_mode & CS_3R_INTERLEAVE);

/* Take the number of zero bits off from the top of the mask. */
addr_mask_deinterleaved = GENMASK_ULL(msb - num_zero_bits, 1);
--
2.33.0


\
 
 \ /
  Last update: 2021-11-16 03:07    [W:2.197 / U:0.468 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site