lkml.org 
[lkml]   [2021]   [Nov]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Date
    SubjectRe: [PATCH v8 5/8] PCI/portdrv: add mechanism to turn on subdev regulators
    On Thu, Nov 11, 2021 at 5:57 PM Rob Herring <robh@kernel.org> wrote:
    >
    > On Wed, Nov 10, 2021 at 4:15 PM Jim Quinlan <jim2101024@gmail.com> wrote:
    > >
    > > Adds a mechanism inside the root port device to identify standard PCIe
    > > regulators in the DT, allocate them, and turn them on before the rest of
    > > the bus is scanned during pci_host_probe(). A root complex driver can
    > > leverage this mechanism by setting the pci_ops methods add_bus and
    > > remove_bus to pci_subdev_regulators_{add,remove}_bus.
    > >
    > > The allocated structure that contains the regulators is stored in
    > > dev.driver_data.
    > >
    > > The unabridged reason for doing this is as follows. We would like the
    > > Broadcom STB PCIe root complex driver (and others) to be able to turn
    > > off/on regulators[1] that provide power to endpoint[2] devices. Typically,
    > > the drivers of these endpoint devices are stock Linux drivers that are not
    > > aware that these regulator(s) exist and must be turned on for the driver to
    > > be probed. The simple solution of course is to turn these regulators on at
    > > boot and keep them on. However, this solution does not satisfy at least
    > > three of our usage modes:
    > >
    > > 1. For example, one customer uses multiple PCIe controllers, but wants the
    > > ability to, by script invoking and unbind, turn any or all of them by and
    > > their subdevices off to save power, e.g. when in battery mode.
    > >
    > > 2. Another example is when a watchdog script discovers that an endpoint
    > > device is in an unresponsive state and would like to unbind, power toggle,
    > > and re-bind just the PCIe endpoint and controller.
    > >
    > > 3. Of course we also want power turned off during suspend mode. However,
    > > some endpoint devices may be able to "wake" during suspend and we need to
    > > recognise this case and veto the nominal act of turning off its regulator.
    > > Such is the case with Wake-on-LAN and Wake-on-WLAN support where PCIe
    > > end-point device needs to be kept powered on in order to receive network
    > > packets and wake-up the system.
    > >
    > > In all of these cases it is advantageous for the PCIe controller to govern
    > > the turning off/on the regulators needed by the endpoint device. The first
    > > two cases can be done by simply unbinding and binding the PCIe controller,
    > > if the controller has control of these regulators.
    > >
    > > [1] These regulators typically govern the actual power supply to the
    > > endpoint chip. Sometimes they may be a the official PCIe socket
    > > power -- such as 3.3v or aux-3.3v. Sometimes they are truly
    > > the regulator(s) that supply power to the EP chip.
    > >
    > > [2] The 99% configuration of our boards is a single endpoint device
    > > attached to the PCIe controller. I use the term endpoint but it could
    > > possible mean a switch as well.
    > >
    > > Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
    > > ---
    > > drivers/pci/bus.c | 72 ++++++++++++++++++++++++++++++++++
    > > drivers/pci/pci.h | 8 ++++
    > > drivers/pci/pcie/portdrv_pci.c | 32 +++++++++++++++
    > > 3 files changed, 112 insertions(+)
    > >
    > > diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
    > > index 3cef835b375f..c39fdf36b0ad 100644
    > > --- a/drivers/pci/bus.c
    > > +++ b/drivers/pci/bus.c
    > > @@ -419,3 +419,75 @@ void pci_bus_put(struct pci_bus *bus)
    > > if (bus)
    > > put_device(&bus->dev);
    > > }
    > > +
    > > +static void *alloc_subdev_regulators(struct device *dev)
    > > +{
    > > + static const char * const supplies[] = {
    > > + "vpcie3v3",
    > > + "vpcie3v3aux",
    > > + "vpcie12v",
    > > + };
    > > + const size_t size = sizeof(struct subdev_regulators)
    > > + + sizeof(struct regulator_bulk_data) * ARRAY_SIZE(supplies);
    > > + struct subdev_regulators *sr;
    > > + int i;
    > > +
    > > + sr = devm_kzalloc(dev, size, GFP_KERNEL);
    > > +
    > > + if (sr) {
    > > + sr->num_supplies = ARRAY_SIZE(supplies);
    > > + for (i = 0; i < ARRAY_SIZE(supplies); i++)
    > > + sr->supplies[i].supply = supplies[i];
    > > + }
    > > +
    > > + return sr;
    > > +}
    > > +
    > > +
    > > +int pci_subdev_regulators_add_bus(struct pci_bus *bus)
    > > +{
    > > + struct device *dev = &bus->dev;
    > > + struct subdev_regulators *sr;
    > > + int ret;
    > > +
    > > + if (!pcie_is_port_dev(bus->self))
    > > + return 0;
    > > +
    > > + if (WARN_ON(bus->dev.driver_data))
    > > + dev_err(dev, "multiple clients using dev.driver_data\n");
    > > +
    > > + sr = alloc_subdev_regulators(&bus->dev);
    > > + if (!sr)
    > > + return -ENOMEM;
    > > +
    > > + bus->dev.driver_data = sr;
    > > + ret = regulator_bulk_get(dev, sr->num_supplies, sr->supplies);
    > > + if (ret)
    > > + return ret;
    > > +
    > > + ret = regulator_bulk_enable(sr->num_supplies, sr->supplies);
    > > + if (ret) {
    > > + dev_err(dev, "failed to enable regulators for downstream device\n");
    > > + return ret;
    > > + }
    > > +
    > > + return 0;
    > > +}
    > > +EXPORT_SYMBOL_GPL(pci_subdev_regulators_add_bus);
    >
    > Can't these just go in the portdrv probe and remove functions now?
    >
    > Rob

    Not really. The idea is that only when a host controller driver does this

    static struct pci_ops my_pcie_ops = {
    .add_bus = pci_subdev_regulators_add_bus , /* see note below */
    .remove_bus = pci_subdev_regulators_remove_bus,
    ...
    }

    does it explicitly want this feature. Without doing this, every PCI
    port in the world will execute a devm_kzalloc() and
    devm_regulator_bulk_get() to (likely) grab nothing, and then there
    will be three superfluous lines in the boot log:

    pci_bus 0001:01: 0001:01 supply vpcie12v not found, using dummy regulator
    pci_bus 0001:01: 0001:01 supply vpcie3v3 not found, using dummy regulator
    pci_bus 0001:01: 0001:01 supply vpcie3v3aux not found, using dummy regulator

    Secondly, our HW needs to know when the alloc/get/enable of
    regulators is done so that the PCIe link can then be attempted. This
    is pretty much the cornerstone of this patchset. To do this the brcm
    RC driver's call to pci_subdev_regulators_add_bus() is wrapped by
    brcm_pcie_add_bus() so that we can do this:

    static struct pci_ops my_pcie_ops = {
    .add_bus = brcm_pcie_add_bus , /* calls pci_subdev_regulators_add_bus() */
    .remove_bus = pci_subdev_regulators_remove_bus,
    ...
    }

    Regards,
    Jim Quinlan
    Broadcom STB

    \
     
     \ /
      Last update: 2021-11-16 01:09    [W:4.239 / U:0.396 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site