lkml.org 
[lkml]   [2021]   [Nov]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v5 12/22] arm64/dts: qcom: Use new compatibles for crypto nodes
Hi Vladimir,

On Fri, 12 Nov 2021 at 15:56, Vladimir Zapolskiy
<vladimir.zapolskiy@linaro.org> wrote:
>
> Hi Bhupesh,
>
> On 11/10/21 12:59 PM, Bhupesh Sharma wrote:
> > Since we are using soc specific qce crypto IP compatibles
> > in the bindings now, use the same in the device tree files
> > which include the crypto nodes.
> >
> > Cc: Thara Gopinath <thara.gopinath@linaro.org>
> > Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
> > Cc: Rob Herring <robh+dt@kernel.org>
> > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> > ---
> > arch/arm64/boot/dts/qcom/ipq6018.dtsi | 2 +-
> > arch/arm64/boot/dts/qcom/sdm845.dtsi | 2 +-
> > 2 files changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
> > index 933b56103a46..f477d026c949 100644
> > --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
> > @@ -204,7 +204,7 @@ cryptobam: dma-controller@704000 {
> > };
> >
> > crypto: crypto@73a000 {
> > - compatible = "qcom,crypto-v5.1";
> > + compatible = "qcom,ipq6018-qce";
> > reg = <0x0 0x0073a000 0x0 0x6000>;
> > clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
> > <&gcc GCC_CRYPTO_AXI_CLK>,
> > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> > index 526087586ba4..8e7cbadff25a 100644
> > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> > @@ -2329,7 +2329,7 @@ cryptobam: dma-controller@1dc4000 {
> > };
> >
> > crypto: crypto@1dfa000 {
> > - compatible = "qcom,crypto-v5.4";
> > + compatible = "qcom,sdm845-qce";
> > reg = <0 0x01dfa000 0 0x6000>;
> > clocks = <&gcc GCC_CE1_AHB_CLK>,
> > <&gcc GCC_CE1_AXI_CLK>,
> >
>
> and in connection to my review comment on v5 11/22 there should be done
> similar changes for ipq8074.dtsi and msm8996.dtsi.

Ok, I will fix this in v6.

Thanks,
Bhupesh

\
 
 \ /
  Last update: 2021-11-15 06:06    [W:0.090 / U:0.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site