lkml.org 
[lkml]   [2021]   [Nov]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.10 441/575] soc: qcom: rpmhpd: Make power_on actually enable the domain
Date
From: Bjorn Andersson <bjorn.andersson@linaro.org>

[ Upstream commit e3e56c050ab6e3f1bd811f0787f50709017543e4 ]

The general expectation is that powering on a power-domain should make
the power domain deliver some power, and if a specific performance state
is needed further requests has to be made.

But in contrast with other power-domain implementations (e.g. rpmpd) the
RPMh does not have an interface to enable the power, so the driver has
to vote for a particular corner (performance level) in rpmh_power_on().

But the corner is never initialized, so a typical request to simply
enable the power domain would not actually turn on the hardware. Further
more, when no more clients vote for a performance state (i.e. the
aggregated vote is 0) the power domain would be turned off.

Fix both of these issues by always voting for a corner with non-zero
value, when the power domain is enabled.

The tracking of the lowest non-zero corner is performed to handle the
corner case if there's ever a domain with a non-zero lowest corner, in
which case both rpmh_power_on() and rpmh_rpmhpd_set_performance_state()
would be allowed to use this lowest corner.

Fixes: 279b7e8a62cc ("soc: qcom: rpmhpd: Add RPMh power domain driver")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20211005033732.2284447-1-bjorn.andersson@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/soc/qcom/rpmhpd.c | 18 ++++++++++++++----
1 file changed, 14 insertions(+), 4 deletions(-)

diff --git a/drivers/soc/qcom/rpmhpd.c b/drivers/soc/qcom/rpmhpd.c
index e7cb40144f9b1..436ec79122ed2 100644
--- a/drivers/soc/qcom/rpmhpd.c
+++ b/drivers/soc/qcom/rpmhpd.c
@@ -30,6 +30,7 @@
* @active_only: True if it represents an Active only peer
* @corner: current corner
* @active_corner: current active corner
+ * @enable_corner: lowest non-zero corner
* @level: An array of level (vlvl) to corner (hlvl) mappings
* derived from cmd-db
* @level_count: Number of levels supported by the power domain. max
@@ -47,6 +48,7 @@ struct rpmhpd {
const bool active_only;
unsigned int corner;
unsigned int active_corner;
+ unsigned int enable_corner;
u32 level[RPMH_ARC_MAX_LEVELS];
size_t level_count;
bool enabled;
@@ -295,13 +297,13 @@ static int rpmhpd_aggregate_corner(struct rpmhpd *pd, unsigned int corner)
static int rpmhpd_power_on(struct generic_pm_domain *domain)
{
struct rpmhpd *pd = domain_to_rpmhpd(domain);
- int ret = 0;
+ unsigned int corner;
+ int ret;

mutex_lock(&rpmhpd_lock);

- if (pd->corner)
- ret = rpmhpd_aggregate_corner(pd, pd->corner);
-
+ corner = max(pd->corner, pd->enable_corner);
+ ret = rpmhpd_aggregate_corner(pd, corner);
if (!ret)
pd->enabled = true;

@@ -346,6 +348,10 @@ static int rpmhpd_set_performance_state(struct generic_pm_domain *domain,
i--;

if (pd->enabled) {
+ /* Ensure that the domain isn't turn off */
+ if (i < pd->enable_corner)
+ i = pd->enable_corner;
+
ret = rpmhpd_aggregate_corner(pd, i);
if (ret)
goto out;
@@ -382,6 +388,10 @@ static int rpmhpd_update_level_mapping(struct rpmhpd *rpmhpd)
for (i = 0; i < rpmhpd->level_count; i++) {
rpmhpd->level[i] = buf[i];

+ /* Remember the first corner with non-zero level */
+ if (!rpmhpd->level[rpmhpd->enable_corner] && rpmhpd->level[i])
+ rpmhpd->enable_corner = i;
+
/*
* The AUX data may be zero padded. These 0 valued entries at
* the end of the map must be ignored.
--
2.33.0


\
 
 \ /
  Last update: 2021-11-15 22:10    [W:1.918 / U:0.764 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site