lkml.org 
[lkml]   [2021]   [Nov]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] watchdog: Add Apple SoC watchdog driver
Thanks a lot for the quick review!

On Sun, Nov 14, 2021, at 13:42, Guenter Roeck wrote:
> On 11/13/21 1:47 AM, Sven Peter wrote:
>> Add support for the watchdog timer found in Apple SoCs. This driver is
>> also required to reboot these machines.
>>
>> Signed-off-by: Sven Peter <sven@svenpeter.dev>
>> ---
>> MAINTAINERS | 1 +
>> drivers/watchdog/Kconfig | 12 ++
>> drivers/watchdog/Makefile | 1 +
>> drivers/watchdog/apple_wdt.c | 223 +++++++++++++++++++++++++++++++++++
>> 4 files changed, 237 insertions(+)
>> create mode 100644 drivers/watchdog/apple_wdt.c
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index ba480837724d..30a1444297a1 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -1756,6 +1756,7 @@ F: drivers/i2c/busses/i2c-pasemi-platform.c
>> F: drivers/irqchip/irq-apple-aic.c
>> F: drivers/mailbox/apple-mailbox.c
>> F: drivers/pinctrl/pinctrl-apple-gpio.c
>> +F: drivers/watchdog/apple_wdt.c
>> F: include/dt-bindings/interrupt-controller/apple-aic.h
>> F: include/dt-bindings/pinctrl/apple.h
>> F: include/linux/apple-mailbox.h
>> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
>> index 9d222ba17ec6..170dec880c8f 100644
>> --- a/drivers/watchdog/Kconfig
>> +++ b/drivers/watchdog/Kconfig
>> @@ -976,6 +976,18 @@ config MSC313E_WATCHDOG
>> To compile this driver as a module, choose M here: the
>> module will be called msc313e_wdt.
>>
>> +config APPLE_WATCHDOG
>> + tristate "Apple SoC watchdog"
>> + depends on ARCH_APPLE || COMPILE_TEST
>> + select WATCHDOG_CORE
>> + help
>> + Say Y here to include support for the Watchdog found in Apple
>> + SoCs such as the M1. Next to the common watchdog features this
>> + driver is also required in order to reboot these SoCs.
>> +
>> + To compile this driver as a module, choose M here: the
>> + module will be called apple_wdt.
>> +
>> # X86 (i386 + ia64 + x86_64) Architecture
>>
>> config ACQUIRE_WDT
>> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
>> index 2ee97064145b..270a518bd8f3 100644
>> --- a/drivers/watchdog/Makefile
>> +++ b/drivers/watchdog/Makefile
>> @@ -93,6 +93,7 @@ obj-$(CONFIG_PM8916_WATCHDOG) += pm8916_wdt.o
>> obj-$(CONFIG_ARM_SMC_WATCHDOG) += arm_smc_wdt.o
>> obj-$(CONFIG_VISCONTI_WATCHDOG) += visconti_wdt.o
>> obj-$(CONFIG_MSC313E_WATCHDOG) += msc313e_wdt.o
>> +obj-$(CONFIG_APPLE_WATCHDOG) += apple_wdt.o
>>
>> # X86 (i386 + ia64 + x86_64) Architecture
>> obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o
>> diff --git a/drivers/watchdog/apple_wdt.c b/drivers/watchdog/apple_wdt.c
>> new file mode 100644
>> index 000000000000..ff6d98aadffc
>> --- /dev/null
>> +++ b/drivers/watchdog/apple_wdt.c
>> @@ -0,0 +1,223 @@
>> +// SPDX-License-Identifier: GPL-2.0-only OR MIT
>> +/*
>> + * Apple SoC Watchdog driver
>> + *
>> + * Copyright (C) The Asahi Linux Contributors
>> + */
>> +
>> +#include <linux/clk.h>
>> +#include <linux/delay.h>
>> +#include <linux/io.h>
>> +#include <linux/kernel.h>
>> +#include <linux/limits.h>
>> +#include <linux/math64.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/watchdog.h>
>> +
>> +/*
>> + * Apple Watchdog MMIO registers
>> + *
>> + * This HW block has three separate watchdogs. WD0 resets the machine
>> + * to recovery mode and is not very useful for us. WD1 and WD2 trigger a normal
>> + * machine reset. WD0 additionally supports a configurable interrupt.
>> + *
>> + * APPLE_WDT_WDx_CUR_TIME is a simple counter incremented for each tick of the
>> + * reference clock. It can also be overwritten to any value.
>> + * Whenever APPLE_WDT_CTRL_RESET_EN is set in APPLE_WDT_WDx_CTRL and
>> + * APPLE_WDTx_WD1_CUR_TIME >= APPLE_WDTx_WD1_BITE_TIME the entire machine is
>> + * reset.
>> + * Whenever APPLE_WDT_CTRL_IRQ_EN is set and APPLE_WDTx_WD1_CUR_TIME >=
>> + * APPLE_WDTx_WD1_BARK_TIME an interrupt is triggered and
>> + * APPLE_WDT_CTRL_IRQ_STATUS is set. The interrupt can be cleared by writing
>> + * 1 to APPLE_WDT_CTRL_IRQ_STATUS.
>
> This information is useless since it is not used. It might make sense
> to add a note
> along the line of "This information can be used to implement pretimeout
> support
> at a later time".

Sure, I'll add that line.

>
>> + */
>> +#define APPLE_WDT_WD0_CUR_TIME 0x00
>> +#define APPLE_WDT_WD0_BITE_TIME 0x04
>> +#define APPLE_WDT_WD0_BARK_TIME 0x08
>> +#define APPLE_WDT_WD0_CTRL 0x0c
>> +
>> +#define APPLE_WDT_WD1_CUR_TIME 0x10
>> +#define APPLE_WDT_WD1_BITE_TIME 0x14
>> +#define APPLE_WDT_WD1_CTRL 0x1c
>> +
>> +#define APPLE_WDT_WD2_CUR_TIME 0x20
>> +#define APPLE_WDT_WD2_BITE_TIME 0x24
>> +#define APPLE_WDT_WD2_CTRL 0x2c
>> +
>> +#define APPLE_WDT_CTRL_IRQ_EN BIT(0)
>> +#define APPLE_WDT_CTRL_IRQ_STATUS BIT(1)
>> +#define APPLE_WDT_CTRL_RESET_EN BIT(2)
>
> Include linux/bits.h

Done.

>
>> +
>> +struct apple_wdt {
>> + struct watchdog_device wdd;
>> + void __iomem *regs;
>> + struct clk *clk;
>> + u32 clk_rate;
>
> clk_get_rate returns unsigned long. Any reason to use u32 ?

No, just a (bad) habit. I'll switch it to unsigned long.

>
>> +};
>> +
>> +static struct apple_wdt *to_apple_wdt(struct watchdog_device *wdd)
>> +{
>> + return container_of(wdd, struct apple_wdt, wdd);
>> +}
>> +
>> +static int apple_wdt_start(struct watchdog_device *wdd)
>> +{
>> + struct apple_wdt *wdt = to_apple_wdt(wdd);
>> +
>> + writel_relaxed(0, wdt->regs + APPLE_WDT_WD1_CUR_TIME);
>> + writel_relaxed(APPLE_WDT_CTRL_RESET_EN, wdt->regs + APPLE_WDT_WD1_CTRL);
>> +
>> + return 0;
>> +}
>> +
>> +static int apple_wdt_stop(struct watchdog_device *wdd)
>> +{
>> + struct apple_wdt *wdt = to_apple_wdt(wdd);
>> +
>> + writel_relaxed(0, wdt->regs + APPLE_WDT_WD1_CTRL);
>> +
>> + return 0;
>> +}
>> +
>> +static int apple_wdt_ping(struct watchdog_device *wdd)
>> +{
>> + struct apple_wdt *wdt = to_apple_wdt(wdd);
>> +
>> + writel_relaxed(0, wdt->regs + APPLE_WDT_WD1_CUR_TIME);
>> +
>> + return 0;
>> +}
>> +
>> +static int apple_wdt_set_timeout(struct watchdog_device *wdd, unsigned int s)
>> +{
>> + struct apple_wdt *wdt = to_apple_wdt(wdd);
>> + u64 timeout;
>> +
>> + timeout = mul_u32_u32(wdt->clk_rate, s);
>> + if (timeout > U32_MAX)
>> + return -EINVAL;
>> +
>
> With
> max_timeout = U32_MAX / wdt->clk_rate;
>
> the result of the above multiply operation is never larger than U32_MAX,
> and both the error check and the use of mul_u32_u32() are unnecessary.
>
> Just use
> u32 timeout = s * wdt->clk_rate;

Good point, will do that.

>
>
>> + writel_relaxed(0, wdt->regs + APPLE_WDT_WD1_CUR_TIME);
>> + writel_relaxed(timeout, wdt->regs + APPLE_WDT_WD1_BITE_TIME);
>> +
>> + wdd->timeout = s;
>> +
>> + return 0;
>> +}
>> +
>> +static unsigned int apple_wdt_get_timeleft(struct watchdog_device *wdd)
>> +{
>> + struct apple_wdt *wdt = to_apple_wdt(wdd);
>> + u32 cur_time, reset_time;
>> +
>> + cur_time = readl_relaxed(wdt->regs + APPLE_WDT_WD1_CUR_TIME);
>> + reset_time = readl_relaxed(wdt->regs + APPLE_WDT_WD1_BITE_TIME);
>> +
>> + return (reset_time - cur_time) / wdt->clk_rate;
>> +}
>> +
>> +static int apple_wdt_restart(struct watchdog_device *wdd, unsigned long mode,
>> + void *cmd)
>> +{
>> + struct apple_wdt *wdt = to_apple_wdt(wdd);
>> +
>> + writel_relaxed(APPLE_WDT_CTRL_RESET_EN, wdt->regs + APPLE_WDT_WD1_CTRL);
>> + writel_relaxed(0, wdt->regs + APPLE_WDT_WD1_BITE_TIME);
>> + writel_relaxed(0, wdt->regs + APPLE_WDT_WD1_CUR_TIME);
>> +
>> + /* flush writes and wait for the reset to be triggered */
>> + (void)readl_relaxed(wdt->regs + APPLE_WDT_WD1_CUR_TIME);
>> + mdelay(150);
>
> Can this magic number be explained ?

I actually should just need to wait for a single tick of the watchdog
clock here before it resets the SoC so something like

while (readl_relaxed(wdt->regs + APPLE_WDT_WD1_CUR_TIME) == 0);

should work without requiring any magic number.

>
>> +
>> + return 0;
>> +}
>> +
>> +static struct watchdog_ops apple_wdt_ops = {
>> + .owner = THIS_MODULE,
>> + .start = apple_wdt_start,
>> + .stop = apple_wdt_stop,
>> + .ping = apple_wdt_ping,
>> + .set_timeout = apple_wdt_set_timeout,
>> + .get_timeleft = apple_wdt_get_timeleft,
>> + .restart = apple_wdt_restart,
>> +};
>> +
>> +static struct watchdog_info apple_wdt_info = {
>> + .identity = "Apple SoC Watchdog",
>> + .options = WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT,
>> +};
>> +
>> +static int apple_wdt_probe(struct platform_device *pdev)
>> +{
>> + struct device *dev = &pdev->dev;
>> + struct apple_wdt *wdt;
>> + int ret;
>> +
>> + wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
>> + if (!wdt)
>> + return -ENOMEM;
>> + platform_set_drvdata(pdev, wdt);
>> +
>> + wdt->regs = devm_platform_ioremap_resource(pdev, 0);
>> + if (IS_ERR(wdt->regs))
>> + return PTR_ERR(wdt->regs);
>> +
>> + /* reset watchdog to safe defaults */
>> + writel_relaxed(0, wdt->regs + APPLE_WDT_WD1_CTRL);
>> + writel_relaxed(U32_MAX, wdt->regs + APPLE_WDT_WD1_BITE_TIME);
>> +
>> + wdt->clk = devm_clk_get(dev, NULL);
>> + if (IS_ERR(wdt->clk))
>> + return PTR_ERR(wdt->clk);
>> +
>> + ret = clk_prepare_enable(wdt->clk);
>> + if (ret)
>> + return ret;
>> +
>> + wdt->clk_rate = clk_get_rate(wdt->clk);
>
> clk_get_rate() can, at least in theory, return 0.

Good catch, will add a check for that.

>
>> + wdt->wdd.ops = &apple_wdt_ops;
>> + wdt->wdd.info = &apple_wdt_info;
>> + wdt->wdd.max_timeout = U32_MAX / wdt->clk_rate;
>> + wdt->wdd.timeout = wdt->wdd.max_timeout;
>
> It is is quite unusual to set the default timeout to the maximum.
> Normally drivers configure 30 or 60 seconds. Are you sure
> this is what you want ?

Didn't really think about this at all. I'll setup a default timeout of 30s
by calling apple_wdt_set_timeout here.

>
>> +
>> + watchdog_stop_on_unregister(&wdt->wdd);
>> + watchdog_set_restart_priority(&wdt->wdd, 128);
>> +
>> + ret = devm_watchdog_register_device(dev, &wdt->wdd); > + if (ret < 0) {
>> + clk_disable_unprepare(wdt->clk);
>> + return ret;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int apple_wdt_remove(struct platform_device *pdev)
>> +{
>> + struct apple_wdt *wdt = platform_get_drvdata(pdev);
>> +
>> + clk_disable_unprepare(wdt->clk);
>
> clk_disable_unprepare() must be called after unregistering the watchdog.
> Please use devm_add_action_or_reset() in the probe function to handle
> clk_disable_unprepare() - see many other watchdog drivers for examples.

Sure, will do that.

>
>> + return 0;
>> +}
>> +
>> +static const struct of_device_id apple_wdt_of_match[] = {
>> + { .compatible = "apple,wdt" },
>> + {},
>> +};
>> +MODULE_DEVICE_TABLE(of, apple_wdt_of_match);
>> +
>> +static struct platform_driver apple_wdt_driver = {
>> + .driver = {
>> + .name = "apple-watchdog",
>> + .of_match_table = apple_wdt_of_match,
>> + },
>> + .probe = apple_wdt_probe,
>> + .remove = apple_wdt_remove,
>> +};
>> +module_platform_driver(apple_wdt_driver);
>> +
>> +MODULE_DESCRIPTION("Apple SoC watchdog driver");
>> +MODULE_AUTHOR("Sven Peter <sven@svenpeter.dev>");
>> +MODULE_LICENSE("Dual MIT/GPL");
>>


Thanks,

Sven

\
 
 \ /
  Last update: 2021-11-14 14:27    [W:0.145 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site