lkml.org 
[lkml]   [2021]   [Nov]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 0/2] Add support for AD7293 Power Amplifier
On Fri, 5 Nov 2021 13:29:27 +0200
Antoniu Miclaus <antoniu.miclaus@analog.com> wrote:

> The AD7293 is a Power Amplifier drain current controller containing
> functionality for general-purpose monitoring and control of
> current, voltage, and temperature, integrated into a single chip
> solution with an SPI-compatible interface.
>
> Datasheet:
> https://www.analog.com/media/en/technical-documentation/data-sheets/AD7293.pdf

Wrong cover letter. This had me rather confused for a few moments as I had
two copies of this in my inbox with different patches underneath!
>
> This series of patches provide an initial implementation of the
> driver with access from the userspace to the:
> - ADC channels (read raw values, set range, set offset)
> - DAC channels (set code, set offset)
> - Temperature sensing (read raw values, set offset)
> - Current sensing (read raw, set offset, set gain)
>
> Antoniu Miclaus (2):
> iio:amplifiers:ad7293: add support for AD7293
> dt-bindings:iio:amplifiers: add ad7293 doc
>
> .../bindings/iio/amplifiers/adi,ad7293.yaml | 49 ++
> drivers/iio/amplifiers/Kconfig | 11 +
> drivers/iio/amplifiers/Makefile | 1 +
> drivers/iio/amplifiers/ad7293.c | 794 ++++++++++++++++++
> 4 files changed, 855 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/amplifiers/adi,ad7293.yaml
> create mode 100644 drivers/iio/amplifiers/ad7293.c
>

\
 
 \ /
  Last update: 2021-11-13 19:14    [W:0.102 / U:0.524 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site