lkml.org 
[lkml]   [2021]   [Nov]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2] iio/adc: ingenic: fix (MIPS) ingenic-adc build errors
From
Date
On 11/12/21 9:29 AM, Jonathan Cameron wrote:
> On Tue, 9 Nov 2021 18:37:55 -0800
> Randy Dunlap <rdunlap@infradead.org> wrote:
>
>> MIPS does not always provide clk*() interfaces and there are no
>> always-present stubs for them, so depending on "MIPS || COMPILE_TEST"
>> is not strong enough to prevent build errors.
>>
>> Likewise MACH_INGENIC_SOC || COMPILE_TEST is not strong enough
>> since if only COMPILE_TEST=y (with some other MIPS MACH_ or CPU or
>> BOARD setting), there are still the same build errors.
>>
>> It looks like depending on MACH_INGENIC is the only thing that is
>> sufficient here in order to prevent build errors.
>>
>> mips-linux-ld: drivers/iio/adc/ingenic-adc.o: in function `jz4770_adc_init_clk_div':
>> ingenic-adc.c:(.text+0xe4): undefined reference to `clk_get_parent'
>> mips-linux-ld: drivers/iio/adc/ingenic-adc.o: in function `jz4725b_adc_init_clk_div':
>> ingenic-adc.c:(.text+0x1b8): undefined reference to `clk_get_parent'
>>
>> Fixes: 1a78daea107d ("IIO: add Ingenic JZ47xx ADC driver.")
>> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
>> Reported-by: kernel test robot <lkp@intel.com>
>> Cc: Artur Rojek <contact@artur-rojek.eu>
>> Cc: Paul Cercueil <paul@crapouillou.net>
>> Cc: linux-mips@vger.kernel.org
>> Cc: Jonathan Cameron <jic23@kernel.org>
>> Cc: Lars-Peter Clausen <lars@metafoo.de>
>> Cc: linux-iio@vger.kernel.org
>> Cc: Florian Fainelli <f.fainelli@gmail.com>
>> Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
>
> I'm a bit confused. There are stubs in include/linux/clk.h for these.
> Why do those not apply here? Are these platforms built with CONFIG_CLK but
> don't provide all the functions?
>
> That sounds highly error prone and rather defeats the object of the
> stubs. Could we either provide the missing stubs, or solve this some other
> way. I'm not keen to massively cut the build coverage this driver is getting
> by dropping COMPILE_TEST if there is any route to avoid doing so.

I'm all for that (above), but it's a mess.

> Based on the guess than any platform with clks must be able to turn them on
> I grepped for int clk_enable() and there seem to be only two possiblities
> bcm63xx and lantiq as sources of the build breakage.

CONFIG_BCM63XX=y
# CONFIG_MACH_INGENIC_SOC is not set
CONFIG_INGENIC_ADC=y
CONFIG_HAVE_CLK=y


According to the build error messages (above), clk_get_parent()
is missing. Looking at <linux/clk.h>, for CONFIG_HAVE_CLK=y,
there is a prototype for clk_get_parent(), and if CONFIG_HAVE_CLK
is not set, there is a stub for it.

Now look at drivers/clk/clk.c and drivers/clk/Makefile:

clk_get_parent() is defined in clk.c, which is built when
CONFIG_COMMON_CLK=y, but that is not set in this .config file.

CONFIG_HAVE_CLK=y, but that doesn't get clk_get_parent()
compiled.

So to me it is a disparity or incongruity between HAVE_CLK and COMMON_CLK.

Russell- do you have any suggestions for how to straighten
this out?


> Jonathan
>
>> ---
>> v2: use MACH_INGENIC instead of MACH_INGENIC_SOC (thanks, Paul)
>>
>> drivers/iio/adc/Kconfig | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> --- linux-next-20211105.orig/drivers/iio/adc/Kconfig
>> +++ linux-next-20211105/drivers/iio/adc/Kconfig
>> @@ -501,7 +501,7 @@ config INA2XX_ADC
>>
>> config INGENIC_ADC
>> tristate "Ingenic JZ47xx SoCs ADC driver"
>> - depends on MIPS || COMPILE_TEST
>> + depends on MACH_INGENIC
>> select IIO_BUFFER
>> help
>> Say yes here to build support for the Ingenic JZ47xx SoCs ADC unit.
>


--
~Randy

\
 
 \ /
  Last update: 2021-11-13 01:41    [W:0.052 / U:0.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site