lkml.org 
[lkml]   [2021]   [Nov]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/4] mtd: rawnand: fsmc: Take instruction delay into account
Date
The FSMC nand controller should apply a delay after the
instruction has been issued on the bus.
The FSMC nand controller driver did not handle this delay.

This patch adds this waiting delay in the FSMC nand
controller driver.

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
---
drivers/mtd/nand/raw/fsmc_nand.c | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/drivers/mtd/nand/raw/fsmc_nand.c b/drivers/mtd/nand/raw/fsmc_nand.c
index 7f057cfee6c4..bff09219ce3a 100644
--- a/drivers/mtd/nand/raw/fsmc_nand.c
+++ b/drivers/mtd/nand/raw/fsmc_nand.c
@@ -15,6 +15,7 @@

#include <linux/clk.h>
#include <linux/completion.h>
+#include <linux/delay.h>
#include <linux/dmaengine.h>
#include <linux/dma-direction.h>
#include <linux/dma-mapping.h>
@@ -667,6 +668,9 @@ static int fsmc_exec_op(struct nand_chip *chip, const struct nand_operation *op,
instr->ctx.waitrdy.timeout_ms);
break;
}
+
+ if (instr->delay_ns)
+ ndelay(instr->delay_ns);
}

return ret;
--
2.31.1
\
 
 \ /
  Last update: 2021-11-12 15:41    [W:0.056 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site