lkml.org 
[lkml]   [2021]   [Nov]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/2] i2c:imx: Deliver a timely stop on slave side, fix recv
Date
I was working on an application that needs the stop condition
immediately. So this adds a timer after each byte is received/sent and
if the bus is idle at the timeout, send the stop.

Also, I noticed when you use the i2c-slave-eeprom, if you read some data
and then read some data again, the last byte of the first read will be
the first byte of the second read. This is because i2c-slave-eeprom
expects a read-ahead. That's what the documentation says, at least.

Thanks to Uwe Kleine-König and Oleksij Rempel for reviewing.

-corey

Changes since v1:

* Added a comment on the hrtimer cancel on why the return value didn't
need to be checked.

* Combine the hrtimer patch into the main timer patch.


\
 
 \ /
  Last update: 2021-11-12 14:40    [W:0.044 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site