lkml.org 
[lkml]   [2021]   [Nov]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH RFC 0/2] CAN TRANSCEIVER: Add support for setting mux
Date
On some boards, for routing CAN signals from controller to transceiver,
muxes might need to be set. Therefore, add support for setting the mux by
reading the mux-controls property from the device tree node.

Aswath Govindraju (2):
dt-bindings: phy: ti,tcan104x-can: Document mux-controls property
phy: phy-can-transceiver: Add support for setting mux

.../bindings/phy/ti,tcan104x-can.yaml | 6 ++++++
drivers/phy/phy-can-transceiver.c | 21 +++++++++++++++++++
2 files changed, 27 insertions(+)

--
2.17.1

\
 
 \ /
  Last update: 2021-11-11 17:44    [W:0.080 / U:0.328 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site