lkml.org 
[lkml]   [2021]   [Nov]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 2/4] Documentation: DT: bindings: input: Add documentation for cyttsp5
On Wed, Nov 10, 2021 at 6:37 PM Andreas Kemnade <andreas@kemnade.info> wrote:
> Alistair Francis <alistair23@gmail.com> wrote:

> You have a kind of double inversion here, so things are automagically fixed.
> IMHO to describe it correctly would be to set GPIO_ACTIVE_LOW here
> and in the driver
>
> /* Reset the gpio to be in a reset state */
> ts->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
> if (IS_ERR(ts->reset_gpio)) {
> rc = PTR_ERR(ts->reset_gpio);
> dev_err(dev, "Failed to request reset gpio, error %d\n", rc);
> return rc;
> }
> gpiod_set_value(ts->reset_gpio, 0);
>
> That is the way how other active-low reset lines are handled.

Correct.

This is a source of confusion, I contemplated just changing the name
of GPIOD_OUT_HIGH to GPIOD_OUT_ASSERTED etc to indicate
what is going on.

gpiod_set_value(ts->reset_gpio, 0) should similarly be interpreted
as "de-assert this line" no matter the polarity.

Yours,
Linus Walleij

\
 
 \ /
  Last update: 2021-11-11 16:17    [W:2.003 / U:2.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site