lkml.org 
[lkml]   [2021]   [Nov]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] arm64: dts: freescale: imx8mq: Disable noc dts node
Date
Adding interconnect properties to the consumer nodes creates
a dependency on noc device. The imx-bus devfreq driver is not usable
without the full interconnect support. The interconnect is not yet
working on i.MX platforms. The devlink created on device_add makes
the lcdif and other nodes that have the interconnect properties
wait for the noc (imx-bus driver) to probe first.

To make sure the interconnect consumers (nodes that have interconnect
properties already added) will still probe, lets disable the noc node
for now. Once the interconnect on i.MX platforms is fully functional,
the status of the noc node can be changed.

Fixes: ad1abc8a03fdbc05b ("arm64: dts: imx8mq: Add interconnect for lcdif")
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
---
arch/arm64/boot/dts/freescale/imx8mq.dtsi | 1 +
1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 972766b67a15..f3182878f596 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -1305,6 +1305,7 @@ noc: interconnect@32700000 {
fsl,ddrc = <&ddrc>;
#interconnect-cells = <1>;
operating-points-v2 = <&noc_opp_table>;
+ status = "disabled";

noc_opp_table: opp-table {
compatible = "operating-points-v2";
--
2.31.1
\
 
 \ /
  Last update: 2021-11-11 12:17    [W:0.054 / U:0.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site