lkml.org 
[lkml]   [2021]   [Nov]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [RFC PATCH v2 1/1] rpmsg: add syslog driver
Hi Arnaud

>
> On 11/9/21 7:06 PM, Bjorn Andersson wrote:
> > On Tue 09 Nov 00:39 PST 2021, Christian Gmeiner wrote:
> >
> >> Allows the remote firmware to log into syslog.
> >>
>
> For you information a similar patch has been sent few years ago:
> https://www.spinics.net/lists/kernel/msg3045824.html
>

Interesting - do you know why the patch was not taken?

> The suspend /resume mechanism seems interesting to manage the low power use case.
>

Yeah .. nothing I thought about.

> >
> > This allows the remote firmware to print log messages in the kernel log,
> > not the syslog (although your system might inject the kernel log into
> > the syslog as well)
> >
> >> Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
> >> ---
> >> drivers/rpmsg/Kconfig | 8 +++++
> >> drivers/rpmsg/Makefile | 1 +
> >> drivers/rpmsg/rpmsg_syslog.c | 65 ++++++++++++++++++++++++++++++++++++
> >
> > drivers/rpmsg is for rpmsg bus and transport drivers. Client drivers
> > should live elsewhere.
> >
> > But perhaps, rather than having a driver for this, you could simply use
> > rpmsg_char and a userspace tool; if you want to get the remote processor
> > logs into syslog, instead of the kernel log?
>
> This is also a question that comes to me while looking at the patch.
> rpmsg_tty service (if available in 5.16) could be another alternative.
>

I thought about it too but I do not see how the syslog/journald can read the log
messages from this tty device without an extra user space component.

With a syslog redirection rpmsg service this happens automatically without any
extra user space daemon that reads from tty and writes to syslog.

Maybe I am missing something.

> Regards,
> Arnaud
>
> >
> >> 3 files changed, 74 insertions(+)
> >> create mode 100644 drivers/rpmsg/rpmsg_syslog.c
> >>
> >> diff --git a/drivers/rpmsg/Kconfig b/drivers/rpmsg/Kconfig
> >> index 0b4407abdf13..801f9956ec21 100644
> >> --- a/drivers/rpmsg/Kconfig
> >> +++ b/drivers/rpmsg/Kconfig
> >> @@ -73,4 +73,12 @@ config RPMSG_VIRTIO
> >> select RPMSG_NS
> >> select VIRTIO
> >>
> >> +config RPMSG_SYSLOG
> >> + tristate "SYSLOG device interface"
> >> + depends on RPMSG
> >> + help
> >> + Say Y here to export rpmsg endpoints as device files, usually found
> >> + in /dev. They make it possible for user-space programs to send and
> >> + receive rpmsg packets.
> >> +
> >> endmenu
> >> diff --git a/drivers/rpmsg/Makefile b/drivers/rpmsg/Makefile
> >> index 8d452656f0ee..75b2ec7133a5 100644
> >> --- a/drivers/rpmsg/Makefile
> >> +++ b/drivers/rpmsg/Makefile
> >> @@ -9,3 +9,4 @@ obj-$(CONFIG_RPMSG_QCOM_GLINK_RPM) += qcom_glink_rpm.o
> >> obj-$(CONFIG_RPMSG_QCOM_GLINK_SMEM) += qcom_glink_smem.o
> >> obj-$(CONFIG_RPMSG_QCOM_SMD) += qcom_smd.o
> >> obj-$(CONFIG_RPMSG_VIRTIO) += virtio_rpmsg_bus.o
> >> +obj-$(CONFIG_RPMSG_SYSLOG) += rpmsg_syslog.o
> >> diff --git a/drivers/rpmsg/rpmsg_syslog.c b/drivers/rpmsg/rpmsg_syslog.c
> >> new file mode 100644
> >> index 000000000000..b3fdae495fd9
> >> --- /dev/null
> >> +++ b/drivers/rpmsg/rpmsg_syslog.c
> >> @@ -0,0 +1,65 @@
> >> +// SPDX-License-Identifier: GPL-2.0
> >> +
> >> +#include <linux/kernel.h>
> >> +#include <linux/module.h>
> >> +#include <linux/rpmsg.h>
> >> +
> >> +static int rpmsg_syslog_cb(struct rpmsg_device *rpdev, void *data, int len,
> >> + void *priv, u32 src)
> >> +{
> >> + const char *buffer = data;
> >> +
> >> + switch (buffer[0]) {
> >> + case 'e':
> >> + dev_err(&rpdev->dev, "%s", buffer + 1);
> >> + break;
> >> + case 'w':
> >> + dev_warn(&rpdev->dev, "%s", buffer + 1);
> >> + break;
> >> + case 'i':
> >> + dev_info(&rpdev->dev, "%s", buffer + 1);
> >> + break;
> >> + default:
> >> + dev_info(&rpdev->dev, "%s", buffer);
> >> + break;
> >> + }
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static int rpmsg_syslog_probe(struct rpmsg_device *rpdev)
> >> +{
> >> + struct rpmsg_endpoint *syslog_ept;
> >> + struct rpmsg_channel_info syslog_chinfo = {
> >> + .src = 42,
> >> + .dst = 42,
> >> + .name = "syslog",
> >> + };
> >> +
> >> + /*
> >> + * Create the syslog service endpoint associated to the RPMsg
> >> + * device. The endpoint will be automatically destroyed when the RPMsg
> >> + * device will be deleted.
> >> + */
> >> + syslog_ept = rpmsg_create_ept(rpdev, rpmsg_syslog_cb, NULL, syslog_chinfo);
> >
> > The rpmsg_device_id below should cause the device to probe on the
> > presence of a "syslog" channel announcement, so why are you creating a
> > new endpoint with the same here?
> >
> > Why aren't you just specifying the callback of the driver?
> >
> >> + if (!syslog_ept) {
> >> + dev_err(&rpdev->dev, "failed to create the syslog ept\n");
> >> + return -ENOMEM;
> >> + }
> >> + rpdev->ept = syslog_ept;
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static struct rpmsg_device_id rpmsg_driver_syslog_id_table[] = {
> >> + { .name = "syslog" },
> >> + { },
> >> +};
> >> +MODULE_DEVICE_TABLE(rpmsg, rpmsg_driver_syslog_id_table);
> >> +
> >> +static struct rpmsg_driver rpmsg_syslog_client = {
> >> + .drv.name = KBUILD_MODNAME,
> >> + .id_table = rpmsg_driver_syslog_id_table,
> >> + .probe = rpmsg_syslog_probe,
> >> +};
> >> +module_rpmsg_driver(rpmsg_syslog_client);
> >
> > I would expect that building this as a module gives you complaints about
> > lacking MODULE_LICENSE().
> >
> > Regards,
> > Bjorn
> >
> >> --
> >> 2.33.1
> >>



--
greets
--
Christian Gmeiner, MSc

https://christian-gmeiner.info/privacypolicy

\
 
 \ /
  Last update: 2021-11-11 11:30    [W:0.455 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site