lkml.org 
[lkml]   [2021]   [Nov]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [EXT] Re: [PATCH] media: ov5640: Fix set format, v4l2_mbus_pixelcode not updated
Date
Hi Hugues,

On Tue, 2021-11-09 at 15:19 +0100, Hugues FRUCHET - FOSS wrote:
>
> Hi Mirela,
>
> Thanks for patch, tested OK on my side:

Thanks, for testing!

Regards,
Mirela

>
> Acked-by: Hugues Fruchet <hugues.fruchet@st.com>
> Tested-by: Hugues Fruchet <hugues.fruchet@st.com>
>
> BR,
> Hugues.
> >
> > -----Original Message-----
> > From: Mirela Rabulea (OSS) <mirela.rabulea@oss.nxp.com>
> > Sent: lundi 1 novembre 2021 20:53
> > To: slongerbeam@gmail.com; mchehab@kernel.org; Hugues FRUCHET <
> > hugues.fruchet@st.com>; jacopo+renesas@jmondi.org
> > Cc: guoniu.zhou@nxp.com; manish.bajaj@nxp.com;
> > robert.chiras@nxp.com; xavier.roumegue@oss.nxp.com;
> > linux-media@vger.kernel.org; linux-kernel@vger.kernel.org;
> > linux-imx@nxp.com; Mirela Rabulea <mirela.rabulea@nxp.com>
> > Subject: [PATCH] media: ov5640: Fix set format, v4l2_mbus_pixelcode
> > not updated
> >
> > From: Mirela Rabulea <mirela.rabulea@nxp.com>
> >
> > In ov5640_set_fmt, pending_fmt_change will always be false, because
> > the sensor format is saved before comparing it with the previous
> > format:
> > fmt = &sensor->fmt;...
> > *fmt = *mbus_fmt;...
> > if (mbus_fmt->code != sensor->fmt.code)
> > sensor->pending_fmt_change = true;
> > This causes the sensor to capture with the previous pixelcode.
> >
> > Also, changes might happen even for V4L2_SUBDEV_FORMAT_TRY, so fix
> > that.
> >
> > Basically, revert back to the state before commit 071154499193
> > ("media: ov5640: Fix set format regression") as it was more clear,
> > and then update format even when pixelcode does not change, as
> > resolution might change.
> >
> > Fixes: 071154499193 ("media: ov5640: Fix set format regression")
> > Fixes: 6949d864776e ("media: ov5640: do not change mode if format
> > or frame interval is unchanged")
> > Fixes: fb98e29ff1ea5 ("media: ov5640: fix mode change regression")
> >
> > Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com>
> > ---
> > drivers/media/i2c/ov5640.c | 14 +++++++-------
> > 1 file changed, 7 insertions(+), 7 deletions(-)
> >
> > diff --git a/drivers/media/i2c/ov5640.c
> > b/drivers/media/i2c/ov5640.c index ddbd71394db3..db5a19babe67
> > 100644
> > --- a/drivers/media/i2c/ov5640.c
> > +++ b/drivers/media/i2c/ov5640.c
> > @@ -2293,7 +2293,6 @@ static int ov5640_set_fmt(struct v4l2_subdev
> > *sd,
> > struct ov5640_dev *sensor = to_ov5640_dev(sd);
> > const struct ov5640_mode_info *new_mode;
> > struct v4l2_mbus_framefmt *mbus_fmt = &format->format;
> > - struct v4l2_mbus_framefmt *fmt;
> > int ret;
> >
> > if (format->pad != 0)
> > @@ -2311,12 +2310,10 @@ static int ov5640_set_fmt(struct
> > v4l2_subdev *sd,
> > if (ret)
> > goto out;
> >
> > - if (format->which == V4L2_SUBDEV_FORMAT_TRY)
> > - fmt = v4l2_subdev_get_try_format(sd, sd_state, 0);
> > - else
> > - fmt = &sensor->fmt;
> > -
> > - *fmt = *mbus_fmt;
> > + if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
> > + *v4l2_subdev_get_try_format(sd, sd_state, 0) =
> > *mbus_fmt;
> > + goto out;
> > + }
> >
> > if (new_mode != sensor->current_mode) {
> > sensor->current_mode = new_mode;
> > @@ -2325,6 +2322,9 @@ static int ov5640_set_fmt(struct v4l2_subdev
> > *sd,
> > if (mbus_fmt->code != sensor->fmt.code)
> > sensor->pending_fmt_change = true;
> >
> > + /* update format even if code is unchanged, resolution might
> > change */
> > + sensor->fmt = *mbus_fmt;
> > +
> > __v4l2_ctrl_s_ctrl_int64(sensor->ctrls.pixel_rate,
> > ov5640_calc_pixel_rate(sensor));
> > out:
> > --
> > 2.25.1
> >
\
 
 \ /
  Last update: 2021-11-10 19:04    [W:0.059 / U:3.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site