lkml.org 
[lkml]   [2021]   [Nov]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH] rtc: rs5c372: Add support of RTC_VL_READ ioctl
From
Date
Hi,

After discussion internally on this patch, we would like to abandon this
patch and purpose this one
https://lore.kernel.org/linux-rtc/20211110115455.18699-1-camel.guo@axis.com/T/#u
instead. Sorry for the inconvenience and please review that patch instead.

Best Regards
Camel Guo

On 11/5/21 1:40 AM, Pavel Modilaynen wrote:
> From: Pavel Modilaynen <pavelmn@lnxpavelmn.se.axis.com>
>
> Read, cache and expose with RTC_VL_READ ioctl low voltage
> detection flag. It is supported on all devices except RS5C372A/B,
> for which osciallation halt detection bit is interpreted
> as low voltage condition.
> Add RTC_VL_CLEAR ioctl to clear the cached value.
>
> Signed-off-by: Pavel Modilaynen <pavelmn@lnxpavelmn.se.axis.com>
> ---
> drivers/rtc/rtc-rs5c372.c | 46 +++++++++++++++++++++++++++++++++++++++
> 1 file changed, 46 insertions(+)
>
> diff --git a/drivers/rtc/rtc-rs5c372.c b/drivers/rtc/rtc-rs5c372.c
> index 80980414890c..68d2ed9670c4 100644
> --- a/drivers/rtc/rtc-rs5c372.c
> +++ b/drivers/rtc/rtc-rs5c372.c
> @@ -126,6 +126,7 @@ struct rs5c372 {
> unsigned smbus:1;
> char buf[17];
> char *regs;
> + int voltage_low;
> };
>
> static int rs5c_get_regs(struct rs5c372 *rs5c)
> @@ -216,22 +217,40 @@ static int rs5c372_rtc_read_time(struct device *dev, struct rtc_time *tm)
> if (status < 0)
> return status;
>
> + /* check the warning bits */
> switch (rs5c->type) {
> case rtc_r2025sd:
> case rtc_r2221tl:
> if ((rs5c->type == rtc_r2025sd && !(ctrl2 & R2x2x_CTRL2_XSTP)) ||
> (rs5c->type == rtc_r2221tl && (ctrl2 & R2x2x_CTRL2_XSTP))) {
> dev_warn(&client->dev, "rtc oscillator interruption detected. Please reset the rtc clock.\n");
> + /* keep it as indicator of low/dead battery */
> + rs5c->voltage_low = 1;
> return -EINVAL;
> }
> break;
> default:
> if (ctrl2 & RS5C_CTRL2_XSTP) {
> dev_warn(&client->dev, "rtc oscillator interruption detected. Please reset the rtc clock.\n");
> + /* keep it as indicator of low/dead battery */
> + rs5c->voltage_low = 1;
> return -EINVAL;
> }
> }
>
> +
> + switch (rs5c->type) {
> + case rtc_rs5c372a:
> + case rtc_rs5c372b:
> + break;
> + default:
> + if (ctrl2 & R2x2x_CTRL2_VDET) {
> + rs5c->voltage_low = 1;
> + dev_warn(&client->dev, "low voltage detected\n");
> + }
> + break;
> + }
> +
> tm->tm_sec = bcd2bin(rs5c->regs[RS5C372_REG_SECS] & 0x7f);
> tm->tm_min = bcd2bin(rs5c->regs[RS5C372_REG_MINS] & 0x7f);
> tm->tm_hour = rs5c_reg2hr(rs5c, rs5c->regs[RS5C372_REG_HOURS]);
> @@ -485,6 +504,32 @@ static int rs5c372_rtc_proc(struct device *dev, struct seq_file *seq)
> #define rs5c372_rtc_proc NULL
> #endif
>
> +#ifdef CONFIG_RTC_INTF_DEV
> +static int rs5c372_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
> +{
> + struct rs5c372 *rs5c = i2c_get_clientdata(to_i2c_client(dev));
> +
> + dev_dbg(dev, "%s: cmd=%x\n", __func__, cmd);
> +
> + switch (cmd) {
> + case RTC_VL_READ:
> + if (rs5c->voltage_low)
> + dev_info(dev, "low voltage detected, date/time is not reliable.\n");
> +
> + return put_user(rs5c->voltage_low, (unsigned int __user *)arg);
> + case RTC_VL_CLR:
> + /* Clear the cached value. */
> + rs5c->voltage_low = 0;
> + return 0;
> + default:
> + return -ENOIOCTLCMD;
> + }
> + return 0;
> +}
> +#else
> +#define rs5c372_ioctl NULL
> +#endif
> +
> static const struct rtc_class_ops rs5c372_rtc_ops = {
> .proc = rs5c372_rtc_proc,
> .read_time = rs5c372_rtc_read_time,
> @@ -492,6 +537,7 @@ static const struct rtc_class_ops rs5c372_rtc_ops = {
> .read_alarm = rs5c_read_alarm,
> .set_alarm = rs5c_set_alarm,
> .alarm_irq_enable = rs5c_rtc_alarm_irq_enable,
> + .ioctl = rs5c372_ioctl,
> };
>
> #if IS_ENABLED(CONFIG_RTC_INTF_SYSFS)
>

\
 
 \ /
  Last update: 2021-11-10 14:05    [W:0.223 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site