lkml.org 
[lkml]   [2021]   [Nov]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [PATCH] drm: bridge: dw-hdmi: Fix RGB to YUV color space conversion
Date
Dne sreda, 10. november 2021 ob 21:20:46 CET je Jernej Škrabec napisal(a):
> Hi Alex,
>
> Dne sobota, 06. november 2021 ob 14:00:44 CET je Alex Bee napisal(a):
> > As per CEA-861 quantization range is always limited in case of YUV
> > output - indepentently which CEA mode it is or if it is an DMT mode.
> >
> > This is already correctly setup in HDMI AVI inforame, but we always do
> > a RGB to YUV conversion which doesn't consider that RGB input can be
> > full range as well.
> > That leads to incorrect colors for all CEA modes except mode 1 for HDMI
> > and always for DVI.
> >
> > To fix this, provide additional csc coefficents for converting from RGB
> > full range to EITU601/EITU709 limited range and rename the existing
> > arrays to clarify their meaning.
> >
> > Signed-off-by: Alex Bee <knaerzche@gmail.com>
> > ---
> >
> > drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 24 +++++++++++++++++++----
> > 1 file changed, 20 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/
>
> bridge/synopsys/dw-hdmi.c
>
> > index 62ae63565d3a..1cba08b70091 100644
> > --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> > +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> > @@ -80,13 +80,25 @@ static const u16 csc_coeff_rgb_out_eitu709[3][4] = {
> >
> > { 0x2000, 0x0000, 0x3b61, 0x7e25 }
> >
> > };
> >
> > -static const u16 csc_coeff_rgb_in_eitu601[3][4] = {
> > +static const u16 csc_coeff_rgb_full_in_eitu601[3][4] = {
>
> I would rather move "full" and "limited" to the end, since RGB always has
> full range and we want YUV to have full or limited range.
>
> Just one observation - no other matrix sets bit 15 in any coefficient, but
> yours do. I can't see anywhere documented if bit 15 is ignored or not. Can
> you try with it set to 0? If it still works, I would set it to 0 for
> consistency.
>
> Best regards,
> Jernej
>
> > + { 0x2044, 0x106f, 0x0644, 0x0040 },
> > + { 0xe677, 0x1c1c, 0xfd46, 0x0200 },

By my calculations, above line should be:
{ 0xe876, 0x1c1c, 0xfb6e, 0x0200}

Can you check again?

> > + { 0xed60, 0xf685, 0x1c1c, 0x0200 }
> > +};
> > +
> > +static const u16 csc_coeff_rgb_limited_in_eitu601[3][4] = {
> >
> > { 0x2591, 0x1322, 0x074b, 0x0000 },
> > { 0x6535, 0x2000, 0x7acc, 0x0200 },
> > { 0x6acd, 0x7534, 0x2000, 0x0200 }
> >
> > };
> >
> > -static const u16 csc_coeff_rgb_in_eitu709[3][4] = {
> > +static const u16 csc_coeff_rgb_full_in_eitu709[3][4] = {
> > + { 0x2750, 0x0baf, 0x03f8, 0x0040 },
> > + { 0xe677, 0x1c1c, 0xfd6d, 0x0200 },
> > + { 0xea55, 0xf98f, 0x1c1c, 0x0200 }
> > +};
> > +
> > +static const u16 csc_coeff_rgb_limted_in_eitu709[3][4] = {
> >
> > { 0x2dc5, 0x0d9b, 0x049e, 0x0000 },
> > { 0x62f0, 0x2000, 0x7d11, 0x0200 },
> > { 0x6756, 0x78ab, 0x2000, 0x0200 }
> >
> > @@ -1023,9 +1035,13 @@ static void dw_hdmi_update_csc_coeffs(struct
> > dw_hdmi
>
> *hdmi)
>
> > csc_coeff = &csc_coeff_rgb_out_eitu709;
> >
> > } else if (is_input_rgb && !is_output_rgb) {
> >
> > if (hdmi->hdmi_data.enc_out_encoding ==
>
> V4L2_YCBCR_ENC_601)
>
> > - csc_coeff = &csc_coeff_rgb_in_eitu601;
> > + csc_coeff = hdmi->hdmi_data.rgb_limited_range
> > + ?
&csc_coeff_rgb_limited_in_eitu601
> > + : &csc_coeff_rgb_full_in_eitu601;
> >
> > else
> >
> > - csc_coeff = &csc_coeff_rgb_in_eitu709;
> > + csc_coeff = hdmi->hdmi_data.rgb_limited_range
> > + ? &csc_coeff_rgb_limted_in_eitu709
> > + : &csc_coeff_rgb_full_in_eitu709;
> >
> > csc_scale = 0;
> >
> > } else if (is_input_rgb && is_output_rgb &&
> >
> > hdmi->hdmi_data.rgb_limited_range) {
> >
> > base-commit: 89636a06fa2ee7826a19c39c19a9bc99ab9340a9




\
 
 \ /
  Last update: 2022-09-17 16:12    [W:0.088 / U:1.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site