lkml.org 
[lkml]   [2021]   [Nov]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH v3 4/8] leds: trigger: netdev: rename and expose NETDEV trigger enum modes
On Wed, Nov 10, 2021 at 08:57:24PM +0100, Ansuel Smith wrote:
> On Tue, Nov 09, 2021 at 09:58:27PM +0100, Andrew Lunn wrote:
> > On Tue, Nov 09, 2021 at 03:26:04AM +0100, Ansuel Smith wrote:
> > > Rename NETDEV trigger enum modes to a more simbolic name and move them
> >
> > symbolic. Randy is slipping :-)
> >
> > > in leds.h to make them accessible by any user.
> >
> > any user? I would be more specific than that. Other triggers dealing
> > with netdev states?
> >
>
> Ok will be more specific. A LED driver require to explicitly support the
> trigger to run in hardware mode. The LED driver will take the
> trigger_data and elaborate his struct to parse all the option
> (blink_mode bitmap, interval)
>
> So the user would be a LED driver that adds support for that specific
> trigger. That is also the reason we need to export them.

Say i have a SATA controller where i can configure it to blink on
reads, or writes, or both. It also needs to understand these netdev
modes? I was meaning you need to narrow the comment down to a trigger
which has something to do with netdev. I assume other sorts of
hardware offloads will appear in the future, once the generic
infrastructure is there.

Andrew

\
 
 \ /
  Last update: 2021-11-10 23:30    [W:0.086 / U:0.308 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site