Messages in this thread Patch in this message | | | From | Greg Kroah-Hartman <> | Subject | [PATCH 5.14 037/125] arm64: dts: imx8mm-kontron: Fix polarity of reg_rst_eth2 | Date | Mon, 1 Nov 2021 10:16:50 +0100 |
| |
From: Frieder Schrempf <frieder.schrempf@kontron.de>
commit 6562d6e350284307e33ea10c7f46a6661ff22770 upstream.
The regulator reg_rst_eth2 should keep the reset signal of the USB ethernet adapter deasserted anytime. Fix the polarity and mark it as always-on.
Anyway, using the regulator is only a workaround for the missing support of specifying a reset GPIO for USB devices in a generic way. As we don't have a solution for this at the moment, at least fix the current workaround.
Fixes: 8668d8b2e67f ("arm64: dts: Add the Kontron i.MX8M Mini SoMs and baseboards") Cc: stable@vger.kernel.org Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts @@ -70,7 +70,9 @@ regulator-name = "rst-usb-eth2"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb_eth2>; - gpio = <&gpio3 2 GPIO_ACTIVE_LOW>; + gpio = <&gpio3 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; }; reg_vdd_5v: regulator-5v {
| |