lkml.org 
[lkml]   [2021]   [Nov]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 2/8] dt-bindings: phy: Add imx8 pcie phy driver support
Date
Add dt-binding for the standalone i.MX8 PCIe PHY driver.

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Tim Harvey <tharvey@gateworks.com>
Tested-by: Tim Harvey <tharvey@gateworks.com>
---
.../bindings/phy/fsl,imx8-pcie-phy.yaml | 95 +++++++++++++++++++
1 file changed, 95 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/fsl,imx8-pcie-phy.yaml

diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8-pcie-phy.yaml
new file mode 100644
index 000000000000..b9f89e343b0b
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/fsl,imx8-pcie-phy.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/fsl,imx8-pcie-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8 SoC series PCIe PHY Device Tree Bindings
+
+maintainers:
+ - Richard Zhu <hongxing.zhu@nxp.com>
+
+properties:
+ "#phy-cells":
+ const: 0
+
+ compatible:
+ enum:
+ - fsl,imx8mm-pcie-phy
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: PHY module clock
+
+ clock-names:
+ items:
+ - const: ref
+
+ resets:
+ items:
+ - description: Phandles to PCIe-related reset lines exposed by SRC
+ IP block.
+
+ reset-names:
+ items:
+ - const: pciephy
+
+ fsl,refclk-pad-mode:
+ description: |
+ Specifies the mode of the refclk pad used. It can be UNUSED(PHY
+ refclock is derived from SoC internal source), INPUT(PHY refclock
+ is provided externally via the refclk pad) or OUTPUT(PHY refclock
+ is derived from SoC internal source and provided on the refclk pad).
+ Refer include/dt-bindings/phy/phy-imx8-pcie.h for the constants
+ to be used.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 0, 1, 2 ]
+
+ fsl,tx-deemph-gen1:
+ description: Gen1 De-emphasis value (optional required).
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 0
+
+ fsl,tx-deemph-gen2:
+ description: Gen2 De-emphasis value (optional required).
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 0
+
+ fsl,clkreq-unsupported:
+ type: boolean
+ description: A boolean property indicating the CLKREQ# signal is
+ not supported in the board design (optional)
+
+required:
+ - "#phy-cells"
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - fsl,refclk-pad-mode
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx8mm-clock.h>
+ #include <dt-bindings/phy/phy-imx8-pcie.h>
+ #include <dt-bindings/reset/imx8mq-reset.h>
+
+ pcie_phy: pcie-phy@32f00000 {
+ compatible = "fsl,imx8mm-pcie-phy";
+ reg = <0x32f00000 0x10000>;
+ clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
+ clock-names = "ref";
+ assigned-clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
+ assigned-clock-rates = <100000000>;
+ assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_100M>;
+ resets = <&src IMX8MQ_RESET_PCIEPHY>;
+ reset-names = "pciephy";
+ fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+ #phy-cells = <0>;
+ };
+...
--
2.25.1
\
 
 \ /
  Last update: 2021-11-02 03:59    [W:0.112 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site