lkml.org 
[lkml]   [2021]   [Nov]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v9 0/5] USB DWC3 host wake up support from system suspend
Date
Avoiding phy powerdown in host mode when wakeup capable devices are 
connected, so that it can be wake up by devices.
Set GENPD_FLAG_ACTIVE_WAKEUP flag to keep usb30_prim gdsc active
when wakeup capable devices are connected to the host.

Changes in v9:
Checking with device_may_makeup property instead of phy_power_off flag.
Changed the IRQ flags and removed hs_phy_mode variable.

Changes in v8:
Moved the dwc3 suspend quirk code in dwc3/host.c to xhci-plat.c
Checking phy_power_off flag instead of usb_wakeup_enabled_descendants
to keep gdsc active.

Changes in v7:
Change in commit text and message in PATCH 1/5 and PATCH 5/5
as per Matthias suggestion.
Added curly braces for if and else if sections in PATCH 4/5.

Changes in v6:
Addressed comments in host.c and core.c
Separated the patches in dwc3-qcom.c to make it simple.
Dropped wakeup-source change as it is not related to this series.

Changes in v5:
Added phy_power_off flag to check presence of wakeup capable devices.
Dropped patch[v4,4/5] as it is present linux-next.
Addressed comments in host.c and dwc3-qcom.c.

Changes in v4:
Addressed Matthias comments raised in v3.

Changes in v3:
Removed need_phy_for_wakeup flag and by default avoiding phy powerdown.
Addressed Matthias comments and added entry for DEV_SUPERSPEED.
Added suspend_quirk in dwc3 host and moved the dwc3_set_phy_speed_flags.
Added wakeup-source dt entry and reading in dwc-qcom.c glue driver.

Changes in v2:
Dropped the patch in clock to set GENPD_FLAG_ACTIVE_WAKEUP flag and
setting in usb dwc3 driver.
Separated the core patch and glue driver patch.
Made need_phy_for_wakeup flag part of dwc structure and
hs_phy_flags as unsgined int.
Adrressed the comment on device_init_wakeup call.
Corrected offset for reading portsc register.
Added pacth to support wakeup in xo shutdown case.

Sandeep Maheswaram (5):
usb: host: xhci: plat: Add suspend quirk for dwc3 controller
usb: dwc3: core: Host wake up support from system suspend
usb: dwc3: qcom: Add helper functions to enable,disable wake irqs
usb: dwc3: qcom: Change the IRQ flag for DP/DM hs phy irq
usb: dwc3: qcom: Keep power domain on to support wakeup

drivers/usb/dwc3/core.c | 7 +++--
drivers/usb/dwc3/dwc3-qcom.c | 73 +++++++++++++++++++++++---------------------
drivers/usb/host/xhci-plat.c | 12 ++++++++
3 files changed, 56 insertions(+), 36 deletions(-)

--
2.7.4

\
 
 \ /
  Last update: 2021-11-01 08:54    [W:0.107 / U:0.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site