Messages in this thread | | | Date | Sat, 9 Oct 2021 19:13:58 +0200 | From | Andrew Lunn <> | Subject | Re: [net-next PATCH v2 11/15] dt-bindings: net: dsa: qca8k: Document qca,sgmii-enable-pll |
| |
On Fri, Oct 08, 2021 at 02:22:21AM +0200, Ansuel Smith wrote: > Document qca,sgmii-enable-pll binding used in the CPU nodes to > enable SGMII PLL on MAC config. > > Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> > --- > Documentation/devicetree/bindings/net/dsa/qca8k.txt | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.txt b/Documentation/devicetree/bindings/net/dsa/qca8k.txt > index 208ee5bc1bbb..b9cccb657373 100644 > --- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt > +++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt > @@ -50,6 +50,12 @@ A CPU port node has the following optional node: > managed entity. See > Documentation/devicetree/bindings/net/fixed-link.txt > for details. > +- qca,sgmii-enable-pll : For SGMII CPU port, explicitly enable PLL, TX and RX > + chain along with Signal Detection. > + This should NOT be enabled for qca8327.
So how about -EINVAL for qca8327, and document it is not valid then.
> + This can be required for qca8337 switch with revision 2.
Maybe add a warning if enabled with revision < 2? I would not make it an error, because there could be devices manufactured with a mixture or v1 and v2 silicon. Do you have any idea how wide spread v1 is?
> + With CPU port set to sgmii and qca8337 it is advised > + to set this unless a communication problem is observed.
Andrew
| |