lkml.org 
[lkml]   [2021]   [Oct]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v3 REPOST] PCIe: limit Max Read Request Size on i.MX to 512 bytes
Date
> -----Original Message-----
> From: Krzysztof Hałasa <khalasa@piap.pl>
> Sent: Wednesday, October 6, 2021 2:17 PM
> To: Bjorn Helgaas <bhelgaas@google.com>
> Cc: linux-pci@vger.kernel.org; Artem Lapkin <email2tema@gmail.com>; Neil
> Armstrong <narmstrong@baylibre.com>; Huacai Chen
> <chenhuacai@gmail.com>; Rob Herring <robh@kernel.org>; Lorenzo Pieralisi
> <lorenzo.pieralisi@arm.com>; Krzysztof Wilczyński <kw@linux.com>; Richard
> Zhu <hongxing.zhu@nxp.com>; Lucas Stach <l.stach@pengutronix.de>;
> linux-kernel@vger.kernel.org
> Subject: [PATCH v3 REPOST] PCIe: limit Max Read Request Size on i.MX to 512
> bytes
>
> DWC PCIe controller imposes limits on the Read Request Size that it can
> handle. For i.MX6 family it's fixed at 512 bytes by default.
>
> If a memory read larger than the limit is requested, the CPU responds with
> Completer Abort (CA) (on i.MX6 Unsupported Request (UR) is returned
> instead due to a design error).
>
> The i.MX6 documentation states that the limit can be changed by writing to
> the PCIE_PL_MRCCR0 register, however there is a fixed (and
> undocumented) maximum (CX_REMOTE_RD_REQ_SIZE constant). Tests
> indicate that values larger than 512 bytes don't work, though.
>
> This patch makes the RTL8111 work on i.MX6.
>
> Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl>
[Richard Zhu] I'm fine with this patch. Acked-by: Richard Zhu <hongxing.zhu@nxp.com>. Thanks.

Best Regards
Richard Zhu

> ---
> While ATM needed only on ARM, this version is compiled in on all archs.
>
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c
> b/drivers/pci/controller/dwc/pci-imx6.c
> index 80fc98acf097..225380e75fff 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -1148,6 +1148,7 @@ static int imx6_pcie_probe(struct platform_device
> *pdev)
> imx6_pcie->vph = NULL;
> }
>
> + max_pcie_mrrs = 512;
> platform_set_drvdata(pdev, imx6_pcie);
>
> ret = imx6_pcie_attach_pd(dev);
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index
> aacf575c15cf..abeb48a64ee3 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -112,6 +112,8 @@ enum pcie_bus_config_types pcie_bus_config =
> PCIE_BUS_PEER2PEER; enum pcie_bus_config_types pcie_bus_config =
> PCIE_BUS_DEFAULT; #endif
>
> +u16 max_pcie_mrrs = 4096; // no limit
> +
> /*
> * The default CLS is used if arch didn't set CLS explicitly and not
> * all pci devices agree on the same value. Arch can override either @@
> -5816,6 +5818,9 @@ int pcie_set_readrq(struct pci_dev *dev, int rq)
> rq = mps;
> }
>
> + if (rq > max_pcie_mrrs)
> + rq = max_pcie_mrrs;
> +
> v = (ffs(rq) - 8) << 12;
>
> ret = pcie_capability_clear_and_set_word(dev, PCI_EXP_DEVCTL, diff
> --git a/include/linux/pci.h b/include/linux/pci.h index
> 06ff1186c1ef..2b95a8204819 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -996,6 +996,7 @@ enum pcie_bus_config_types { };
>
> extern enum pcie_bus_config_types pcie_bus_config;
> +extern u16 max_pcie_mrrs;
>
> extern struct bus_type pci_bus_type;
>
>
> --
> Krzysztof "Chris" Hałasa
>
> Sieć Badawcza Łukasiewicz
> Przemysłowy Instytut Automatyki i Pomiarów PIAP Al. Jerozolimskie 202,
> 02-486 Warszawa
\
 
 \ /
  Last update: 2021-10-08 09:20    [W:0.046 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site