lkml.org 
[lkml]   [2021]   [Oct]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH v2 2/3] dt-bindings: phy: phy-stm32-usbphyc: add optional phy tuning properties
From
Date
Hi Rob,

On 10/6/21 12:45 AM, Rob Herring wrote:
> On Tue, 05 Oct 2021 17:24:52 +0200, Amelie Delaunay wrote:
>> This patch adds the description of new optional phy tuning properties
>> for usbphyc phy sub nodes.
>>
>> Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
>> ---
>> Changes in v2:
>> - st,phy-tuning property removed
>> - tuning properties are now put directly in each child node
>> - tuning properties are no more free form text and their name reworked
>> ---
>> .../bindings/phy/phy-stm32-usbphyc.yaml | 126 ++++++++++++++++++
>> 1 file changed, 126 insertions(+)
>>
>
> Running 'make dtbs_check' with the schema in this patch gives the
> following warnings. Consider if they are expected or the schema is
> incorrect. These may not be new warnings.
>
> Note that it is not yet a requirement to have 0 warnings for dtbs_check.
> This will change in the future.
>
> Full log is available here: https://patchwork.ozlabs.org/patch/1536730
>
>
> usbphyc@5a006000: usb-phy@0: 'phy-supply' is a required property
> arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2.dt.yaml
> arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dt.yaml
> arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dt.yaml
> arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dt.yaml
> arch/arm/boot/dts/stm32mp157c-lxa-mc1.dt.yaml
> arch/arm/boot/dts/stm32mp157c-odyssey.dt.yaml
>
> usbphyc@5a006000: usb-phy@1: 'phy-supply' is a required property
> arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2.dt.yaml
> arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dt.yaml
> arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dt.yaml
> arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dt.yaml
> arch/arm/boot/dts/stm32mp157c-lxa-mc1.dt.yaml
> arch/arm/boot/dts/stm32mp157c-odyssey.dt.yaml
>

These warnings are due to the fact that usbphyc parent node is disabled
in parent device tree (stm32mp151.dtsi) but not the "usb-phy" child
nodes. These warnings are not introduced by this current patch "optional
phy tuning properties" but anyway. The device trees mentioned don't
enable usbphyc, so they don't have to set phy-supply in usbphyc child nodes.

$ git diff arch/arm/boot/dts/stm32mp151.dtsi
diff --git a/arch/arm/boot/dts/stm32mp151.dtsi
b/arch/arm/boot/dts/stm32mp151.dtsi
index bd289bf5d269..abef8b6be40a 100644
--- a/arch/arm/boot/dts/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/stm32mp151.dtsi
@@ -1507,11 +1507,13 @@ usbphyc: usbphyc@5a006000 {
usbphyc_port0: usb-phy@0 {
#phy-cells = <0>;
reg = <0>;
+ status = "disabled";
};

usbphyc_port1: usb-phy@1 {
#phy-cells = <1>;
reg = <1>;
+ status = "disabled";
};
};

Disable child nodes while parent node is already disabled fixes the
warning. But it means to add status = "okay"; in child nodes everywhere
usbphyc is enabled.
Is it normal dtbs_check checks in child nodes when parent node is disabled?
Regards,
Amelie

\
 
 \ /
  Last update: 2021-10-06 08:52    [W:0.093 / U:0.844 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site