lkml.org 
[lkml]   [2021]   [Oct]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [Freedreno] [PATCH 07/11] drm/msm/disp/dpu1: Don't use DSC with mode_3d
On 02-08-21, 17:24, abhinavk@codeaurora.org wrote:
> On 2021-07-14 23:51, Vinod Koul wrote:
> > We cannot enable mode_3d when we are using the DSC. So pass
> > configuration to detect DSC is enabled and not enable mode_3d
> > when we are using DSC
> >
> > We add a helper dpu_encoder_helper_get_dsc_mode() to detect dsc
> > enabled and pass this to .setup_intf_cfg()
> >
> This is not entirely correct. This is true only for the 2-2-1 topology you
> are using
> on this panel.
>
> When you are using 2-2-1, you are using 2 LMs, 2 DSCs and 1 DSI.
> So 3D mux shouldnt be used.
>
> If you are using something like 4-2-1 or 4-2-2, then you have 4LMs,
> 2 DSCs and 2/1 DSI.
>
> Here you need the 3D mux to convert the data from 4LMs to 2 DSCs.
>
> So please correct the commit text here and also add a check for the
> topology.

Ack, we should mention this and modify it in future when more topology
support is added.

--
~Vinod

\
 
 \ /
  Last update: 2021-10-06 14:23    [W:0.190 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site