lkml.org 
[lkml]   [2021]   [Oct]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[net-next PATCH 13/13] Documentation: devicetree: net: dsa: qca8k: document open drain binding
    Date
    Document new binding qca,power_on_sel used to enable Power-on-strapping
    select reg and qca,led_open_drain to set led to open drain mode.

    Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
    ---
    Documentation/devicetree/bindings/net/dsa/qca8k.txt | 4 ++++
    1 file changed, 4 insertions(+)

    diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.txt b/Documentation/devicetree/bindings/net/dsa/qca8k.txt
    index 550f4313c6e0..4f6ef9f9e024 100644
    --- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt
    +++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt
    @@ -13,6 +13,10 @@ Required properties:
    Optional properties:

    - reset-gpios: GPIO to be used to reset the whole device
    +- qca,package48: Set to 48-pin mode required in some QCA8327 switches.
    +- qca,power-on-sel: Enable Power-on-strapping select required in some QCA8327
    + switches.
    +- qca,led-open-drain: Set leds to open-drain mode.
    - qca,mac6-exchange: Internally swap MAC0 and MAC6.
    - qca,sgmii-rxclk-falling-edge: Set the receive clock phase to falling edge.
    - qca,sgmii-txclk-falling-edge: Set the transmit clock phase to falling edge.
    --
    2.32.0
    \
     
     \ /
      Last update: 2021-10-07 00:38    [W:4.044 / U:0.024 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site