lkml.org 
[lkml]   [2021]   [Oct]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2] rtl8xxxu: Use lower tx rates for the ack packet
From
Date
Chris Chiu <chris.chiu@canonical.com> wrote:

> According to the Realtek propritary driver and the rtw88 driver, the
> tx rates of the ack (includes block ack) are initialized with lower
> tx rates (no HT rates) which is set by the RRSR register value. In
> real cases, ack rate higher than current tx rate could lead to
> difficulty for the receiving end to receive management/control frames.
> The retransmission rate would be higher then expected when the driver
> is acting as receiver and the RSSI is not good.
>
> Cross out higer rates for ack packet before implementing dynamic rrsr
> configuration like the commit 4830872685f8 ("rtw88: add dynamic rrsr
> configuration").
>
> Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
> Acked-by: Jes Sorensen <Jes.Sorensen@gmail.com>

Patch applied to wireless-drivers-next.git, thanks.

7acd723c30c0 rtl8xxxu: Use lower tx rates for the ack packet

--
https://patchwork.kernel.org/project/linux-wireless/patch/20211001040044.1028708-1-chris.chiu@canonical.com/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

\
 
 \ /
  Last update: 2021-10-05 07:34    [W:0.048 / U:2.352 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site