lkml.org 
[lkml]   [2021]   [Oct]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [RFC] drm/msm/dp: Allow attaching a drm_panel
Hi,

On Fri, Oct 1, 2021 at 2:00 PM Bjorn Andersson
<bjorn.andersson@linaro.org> wrote:
>
> On Fri 27 Aug 13:52 PDT 2021, Doug Anderson wrote:
>
> > Hi,
> >
> > On Mon, Jul 26, 2021 at 4:15 PM Bjorn Andersson
> > <bjorn.andersson@linaro.org> wrote:
> > >
> > > +static int dp_parser_find_panel(struct dp_parser *parser)
> > > +{
> > > + struct device_node *np = parser->pdev->dev.of_node;
> > > + int rc;
> > > +
> > > + rc = drm_of_find_panel_or_bridge(np, 2, 0, &parser->drm_panel, NULL);
> >
> > Why port 2? Shouldn't this just be port 1 always? The yaml says that
> > port 1 is "Output endpoint of the controller". We should just use port
> > 1 here, right?
> >
>
> Finally got back to this, changed it to 1 and figured out why I left it
> at 2.
>
> drm_of_find_panel_or_bridge() on a DP controller will find the of_graph
> reference to the USB-C controller, scan through the registered panels
> and conclude that the of_node of the USB-C controller isn't a registered
> panel and return -EPROBE_DEFER.

I'm confused, but maybe it would help if I could see something
concrete. Is there a specific board this was happening on?

Under the DP node in the device tree I expect:

ports {
port@1 {
reg = <1>;
edp_out: endpoint {
remote-endpoint = <&edp_panel_in>;
};
};
};

If you have "port@1" pointing to a USB-C controller but this instance
of the DP controller is actually hooked up straight to a panel then
you should simply delete the "port@1" that points to the typeC and
replace it with one that points to a panel, right?

-Doug

\
 
 \ /
  Last update: 2021-10-05 02:37    [W:0.128 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site