Messages in this thread Patch in this message |  | | From | Paul Cercueil <> | Subject | [PATCH v2 2/2] ARM: dts: exynos/i9100: Use interrupt for BCM4330 host wakeup | Date | Sun, 31 Oct 2021 23:41:37 +0000 |
| |
Switch away from using the deprecated 'host-wakeup-gpios' property, and use a 'host-wakeup' interrupt instead, as suggested by the binding documentation.
Signed-off-by: Paul Cercueil <paul@crapouillou.net> --- arch/arm/boot/dts/exynos4210-i9100.dts | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts index 5f5d9b135736..76b1017e05e8 100644 --- a/arch/arm/boot/dts/exynos4210-i9100.dts +++ b/arch/arm/boot/dts/exynos4210-i9100.dts @@ -829,7 +829,10 @@ bluetooth { shutdown-gpios = <&gpl0 4 GPIO_ACTIVE_HIGH>; reset-gpios = <&gpl1 0 GPIO_ACTIVE_LOW>; device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>; - host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>; + + interrupt-parent = <&gpx2>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "host-wakeup"; }; }; -- 2.33.0
|  |