[lkml]   [2021]   [Oct]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subjectkernel 5.15 does not boot with 3ware card (never had this issue <= 5.14) - scsi 0:0:0:0: WARNING: (0x06:0x002C) : Command (0x12) timed out, resetting card

Issue: 5.15 hangs at boot (hangs when trying to initialize the 3ware card,
have not had this issue with any prior 5.x kernel 5.(0-14).

Arch: x86_64
Kernel: 5.15
Distribution: Debian testing
Note: Upgraded from 5.14.8 to 5.15, the diff between the two .config's is
posted below, thoughts?

dmesg snippet:
[8.0574191 loop: module loaded
[8.0575251 the cryptoloop driver has been deprecated and will be removed in
in Linux 5.16
[8.057809] LSI 3uare SAS/SATA-RAID Controller device driver for Linux
[8.3369831 tc: Refined TC clocksource calibration: 3699.999 MHz
[8.3371911 clocksource: tsc: mask: Oxffffffffffffffff max_cycles:
Ox6aaaa900000, max_idle_ns: 881590498719 ns
[8.3375551 clocksource: Switched to clocksource tsc
( ... )
[9.097964] 3u-sas: scsiO: AEN: INFO (0x04:0x0053): Battery capacity test is
[9.201986] scsi host: 3w-sas
[9.305954] 3u-sas: scsi0: Found an LSI 3ware 9750-2414e Controller at
Oxfb760000, IRQ: 45.
[9.6179701 3u-sas: scsi0: Firmuare FH9X, BIOS BE9X,
Phys: 28.
[30.498007] scsi 0:0:0:0: WARNING: (0x06:0x002C) : Command (0x12) timed out,
resetting card
[71.4419581 scsi 0:0:0:0: WARNING: (0x06: 0x002C): Command (0x0) timed out,
resetting card.


Full configs:

Diff between 5.14 and 5.15 .config files-- could it be something to do with




 \ /
  Last update: 2021-11-01 00:20    [W:0.083 / U:0.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site