lkml.org 
[lkml]   [2021]   [Oct]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] rtc: rs5c372: Add support for trim configuration
Hello,

Please use the proper RTC interface by implementing .set_offset and
.read_offset.

On 31/10/2021 00:50:53+0200, Pavel Modilaynen wrote:
> From: Pavel Modilaynen <pavelmn@axis.com>
>
> Add support for oscillation adjustment register RS5C372_REG_TRIM
> setting that is needed to accommodate for effective crystal
> capacitance.
>
> Use optional property ricoh,trim that should contain
> raw value to setup this register. According to
> datasheets for RS5C372, R2025S/D, RV5C38[67] and R222[13]
> the value will be converted to a number of ticks that
> is to be subtracted or added when the second digits read
> 00, 20 or 40 seconds.
>
> Signed-off-by: Pavel Modilaynen <pavelmn@axis.com>
> ---
> drivers/rtc/rtc-rs5c372.c | 18 +++++++++++++++++-
> 1 file changed, 17 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/rtc/rtc-rs5c372.c b/drivers/rtc/rtc-rs5c372.c
> index 80980414890c..3a2db0326669 100644
> --- a/drivers/rtc/rtc-rs5c372.c
> +++ b/drivers/rtc/rtc-rs5c372.c
> @@ -13,6 +13,7 @@
> #include <linux/slab.h>
> #include <linux/module.h>
> #include <linux/of_device.h>
> +#include <linux/of.h>
>
> /*
> * Ricoh has a family of I2C based RTCs, which differ only slightly from
> @@ -560,6 +561,8 @@ static int rs5c_oscillator_setup(struct rs5c372 *rs5c372)
> {
> unsigned char buf[2];
> int addr, i, ret = 0;
> + struct i2c_client *client = rs5c372->client;
> + u8 trim = 0;
>
> addr = RS5C_ADDR(RS5C_REG_CTRL1);
> buf[0] = rs5c372->regs[RS5C_REG_CTRL1];
> @@ -599,9 +602,22 @@ static int rs5c_oscillator_setup(struct rs5c372 *rs5c372)
> break;
> }
>
> + /* optional setup of xtal trimming */
> + if (!of_property_read_u8(client->dev.of_node, "ricoh,trim", &trim)) {
> + if (rs5c372->type != rtc_r2221tl && (trim & ~RS5C372_TRIM_MASK)) {
> + dev_warn(&client->dev, "Erroneous setting for ricoh,trim in devicetree\n");
> + } else {
> + int addr = RS5C_ADDR(RS5C372_REG_TRIM);
> + int ret = i2c_smbus_write_byte_data(client, addr, trim);
> +
> + if (unlikely(ret < 0))
> + return ret;
> + }
> + }
> +
> for (i = 0; i < sizeof(buf); i++) {
> addr = RS5C_ADDR(RS5C_REG_CTRL1 + i);
> - ret = i2c_smbus_write_byte_data(rs5c372->client, addr, buf[i]);
> + ret = i2c_smbus_write_byte_data(client, addr, buf[i]);
> if (unlikely(ret < 0))
> return ret;
> }
> --
> 2.20.1
>

--
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

\
 
 \ /
  Last update: 2021-10-31 00:58    [W:0.048 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site