Messages in this thread Patch in this message | | | From | Hans de Goede <> | Subject | [PATCH 04/13] power: supply: bq25890: Fix initial setting of the F_CONV_RATE field | Date | Sat, 30 Oct 2021 20:28:04 +0200 |
| |
The code doing the initial setting of the F_CONV_RATE field based on the bq->state.online flag. In order for this to work properly, this must be done after the initial bq25890_get_chip_state() call.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- drivers/power/supply/bq25890_charger.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/power/supply/bq25890_charger.c b/drivers/power/supply/bq25890_charger.c index 491d36a3811a..99497fdc73da 100644 --- a/drivers/power/supply/bq25890_charger.c +++ b/drivers/power/supply/bq25890_charger.c @@ -682,16 +682,16 @@ static int bq25890_hw_init(struct bq25890_device *bq) } } - /* Configure ADC for continuous conversions when charging */ - ret = bq25890_field_write(bq, F_CONV_RATE, !!bq->state.online); + ret = bq25890_get_chip_state(bq, &bq->state); if (ret < 0) { - dev_dbg(bq->dev, "Config ADC failed %d\n", ret); + dev_dbg(bq->dev, "Get state failed %d\n", ret); return ret; } - ret = bq25890_get_chip_state(bq, &bq->state); + /* Configure ADC for continuous conversions when charging */ + ret = bq25890_field_write(bq, F_CONV_RATE, !!bq->state.online); if (ret < 0) { - dev_dbg(bq->dev, "Get state failed %d\n", ret); + dev_dbg(bq->dev, "Config ADC failed %d\n", ret); return ret; } -- 2.31.1
| |