lkml.org 
[lkml]   [2021]   [Oct]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] mfd: Kconfig: change INTEL_SOC_PMIC_CHTDC_TI to bool
Date
The INTEL_SOC_PMIC_CHTDC_TI should be initialized early, before
loading the fbcon driver, as otherwise the i915 driver will
fail to configure pwm:

[ 13.674287] fb0: switching to inteldrmfb from EFI VGA
[ 13.682380] Console: switching to colour dummy device 80x25
[ 13.682468] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 13.682686] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 13.685773] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 13.686219] i915 0000:00:02.0: [drm] *ERROR* Failed to configure the pwm chip
[ 13.699572] [drm] Initialized i915 1.6.0 20200313 for 0000:00:02.0 on minor 0
[ 13.739044] fbcon: i915drmfb (fb0) is primary device
[ 14.037792] intel_soc_pmic_exec_mipi_pmic_seq_element: No PMIC registered
...
[ 24.621403] intel_pmic_install_opregion_handler: Ask to register OpRegion for bus ID=PMI2, HID=INT33F5
[ 24.630540] intel_pmic_install_opregion_handler: OpRegion registered

(some extra debug printk's were added to the above)

As suggested by Hans, this patch also addresses an issue with
the dependencies, as, for this driver to be a bool, it also
need the I2C core and the I2C_DESIGNWARE driver to be builtin.

Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
drivers/mfd/Kconfig | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index ca0edab91aeb..f9092c79c4e8 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -632,7 +632,7 @@ config INTEL_SOC_PMIC_CHTWC
config INTEL_SOC_PMIC_CHTDC_TI
tristate "Support for Intel Cherry Trail Dollar Cove TI PMIC"
depends on GPIOLIB
- depends on I2C
+ depends on I2C = y && I2C_DESIGNWARE_PLATFORM=y
depends on ACPI
depends on X86
select MFD_CORE
@@ -642,6 +642,10 @@ config INTEL_SOC_PMIC_CHTDC_TI
Select this option for supporting Dollar Cove (TI version) PMIC
device that is found on some Intel Cherry Trail systems.

+ This option is a bool as it provides an ACPI OpRegion which must be
+ available before any devices using it are probed. This option also
+ needs the designware-i2c driver to be builtin for the same reason.
+
config INTEL_SOC_PMIC_MRFLD
tristate "Support for Intel Merrifield Basin Cove PMIC"
depends on GPIOLIB
--
2.31.1
\
 
 \ /
  Last update: 2021-10-29 09:03    [W:0.065 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site