lkml.org 
[lkml]   [2021]   [Oct]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [v2] drm/msm/disp/dpu1: set default group ID for CTL.
On Fri, 29 Oct 2021 at 15:30, Kalyan Thota <quic_kalyant@quicinc.com> wrote:
>
> New required programming in CTL for SC7280. Group ID informs
> HW of which VM owns that CTL. Force this group ID to
> default/disabled until virtualization support is enabled in SW.
>
> Changes in v1:
> - Fix documentation and add descritpion for the change (Stephen)
>
> Signed-off-by: Kalyan Thota <quic_kalyant@quicinc.com>

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

> ---
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 2 +-
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 5 ++++-
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c | 8 ++++++++
> 3 files changed, 13 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> index ce6f32a..283605c 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> @@ -45,7 +45,7 @@
> (PINGPONG_SDM845_MASK | BIT(DPU_PINGPONG_TE2))
>
> #define CTL_SC7280_MASK \
> - (BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_FETCH_ACTIVE))
> + (BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_FETCH_ACTIVE) | BIT(DPU_CTL_VM_CFG))
>
> #define MERGE_3D_SM8150_MASK (0)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> index 4ade44b..31af04a 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> @@ -179,13 +179,16 @@ enum {
>
> /**
> * CTL sub-blocks
> - * @DPU_CTL_SPLIT_DISPLAY CTL supports video mode split display
> + * @DPU_CTL_SPLIT_DISPLAY: CTL supports video mode split display
> + * @DPU_CTL_FETCH_ACTIVE: Active CTL for fetch HW (SSPPs)
> + * @DPU_CTL_VM_CFG: CTL config to support multiple VMs
> * @DPU_CTL_MAX
> */
> enum {
> DPU_CTL_SPLIT_DISPLAY = 0x1,
> DPU_CTL_ACTIVE_CFG,
> DPU_CTL_FETCH_ACTIVE,
> + DPU_CTL_VM_CFG,
> DPU_CTL_MAX
> };
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> index 64740ddb..02da9ec 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> @@ -36,6 +36,7 @@
> #define MERGE_3D_IDX 23
> #define INTF_IDX 31
> #define CTL_INVALID_BIT 0xffff
> +#define CTL_DEFAULT_GROUP_ID 0xf
>
> static const u32 fetch_tbl[SSPP_MAX] = {CTL_INVALID_BIT, 16, 17, 18, 19,
> CTL_INVALID_BIT, CTL_INVALID_BIT, CTL_INVALID_BIT, CTL_INVALID_BIT, 0,
> @@ -498,6 +499,13 @@ static void dpu_hw_ctl_intf_cfg_v1(struct dpu_hw_ctl *ctx,
> u32 intf_active = 0;
> u32 mode_sel = 0;
>
> + /* CTL_TOP[31:28] carries group_id to collate CTL paths
> + * per VM. Explicitly disable it until VM support is
> + * added in SW. Power on reset value is not disable.
> + */
> + if ((test_bit(DPU_CTL_VM_CFG, &ctx->caps->features)))
> + mode_sel = CTL_DEFAULT_GROUP_ID << 28;
> +
> if (cfg->intf_mode_sel == DPU_CTL_MODE_SEL_CMD)
> mode_sel |= BIT(17);
>
> --
> 2.7.4
>


--
With best wishes
Dmitry

\
 
 \ /
  Last update: 2021-10-29 15:08    [W:0.043 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site