lkml.org 
[lkml]   [2021]   [Oct]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: selftests: seccomp_bpf failure on 5.15
Kees Cook <keescook@chromium.org> writes:

> On Thu, Oct 28, 2021 at 12:26:26PM -0500, Eric W. Biederman wrote:
>> Kees Cook <keescook@chromium.org> writes:
>>
>> > On Thu, Oct 28, 2021 at 06:21:12PM +0200, Andrea Righi wrote:
>> >> The following sub-tests are failing in seccomp_bpf selftest:
>> >>
>> >> 18:56:54 DEBUG| [stdout] # selftests: seccomp: seccomp_bpf
>> >> ...
>> >> 18:56:57 DEBUG| [stdout] # # RUN TRACE_syscall.ptrace.kill_after ...
>> >> 18:56:57 DEBUG| [stdout] # # seccomp_bpf.c:2023:kill_after:Expected entry ? PTRACE_EVENTMSG_SYSCALL_ENTRY : PTRACE_EVENTMSG_SYSCALL_EXIT (1) == msg (0)
>> >> 18:56:57 DEBUG| [stdout] # # seccomp_bpf.c:2023:kill_after:Expected entry ? PTRACE_EVENTMSG_SYSCALL_ENTRY : PTRACE_EVENTMSG_SYSCALL_EXIT (2) == msg (1)
>> >> 18:56:57 DEBUG| [stdout] # # seccomp_bpf.c:2023:kill_after:Expected entry ? PTRACE_EVENTMSG_SYSCALL_ENTRY : PTRACE_EVENTMSG_SYSCALL_EXIT (1) == msg (2)
>> >> 18:56:57 DEBUG| [stdout] # # kill_after: Test exited normally instead of by signal (code: 12)
>> >> 18:56:57 DEBUG| [stdout] # # FAIL TRACE_syscall.ptrace.kill_after
>> >> ...
>> >> 18:56:57 DEBUG| [stdout] # # RUN TRACE_syscall.seccomp.kill_after ...
>> >> 18:56:57 DEBUG| [stdout] # # seccomp_bpf.c:1547:kill_after:Expected !ptrace_syscall (1) == IS_SECCOMP_EVENT(status) (0)
>> >> 18:56:57 DEBUG| [stdout] # # kill_after: Test exited normally instead of by signal (code: 0)
>> >> 18:56:57 DEBUG| [stdout] # # FAIL TRACE_syscall.seccomp.kill_after
>> >> 18:56:57 DEBUG| [stdout] # not ok 80 TRACE_syscall.seccomp.kill_after
>> >> ...
>> >> 18:56:57 DEBUG| [stdout] # # FAILED: 85 / 87 tests passed.
>> >> 18:56:57 DEBUG| [stdout] # # Totals: pass:85 fail:2 xfail:0 xpass:0 skip:0 error:0
>> >> 18:56:57 DEBUG| [stdout] not ok 1 selftests: seccomp: seccomp_bpf # exit=1
>> >>
>> >> I did some bisecting and found that the failures started to happen with:
>> >>
>> >> 307d522f5eb8 ("signal/seccomp: Refactor seccomp signal and coredump generation")
>> >>
>> >> Not sure if the test needs to be fixed after this commit, or if the
>> >> commit is actually introducing an issue. I'll investigate more, unless
>> >> someone knows already what's going on.
>> >
>> > Ah thanks for noticing; I will investigate...
>>
>>
>> I just did a quick read through of the test and while
>> I don't understand everything having a failure seems
>> very weird.
>>
>> I don't understand the comment:
>> /* Tracer will redirect getpid to getppid, and we should die. */
>>
>> As I think what happens is it the bpf programs loads the signal
>> number. Tests to see if the signal number if GETPPID and allows
>> that system call and causes any other system call to be terminated.
>
> The test suite runs a series of seccomp filter vs syscalls under tracing,
> either with ptrace or with seccomp SECCOMP_RET_TRACE, to validate the
> expected behavioral states. It seems that what's happened is that the
> SIGSYS has suddenly become non-killing:
>
> # RUN TRACE_syscall.ptrace.kill_after ...
> # seccomp_bpf.c:1555:kill_after:Expected WSTOPSIG(status) & 0x80 (0) == 0x80 (128)
> # seccomp_bpf.c:1556:kill_after:WSTOPSIG: 31
> # kill_after: Test exited normally instead of by signal (code: 12)
> # FAIL TRACE_syscall.ptrace.kill_after
>
> i.e. the ptracer no longer sees a dead tracee, which would pass through
> here:
>
> if (WIFSIGNALED(status) || WIFEXITED(status))
> /* Child is dead. Time to go. */
> return;
>
> So the above saw a SIG_TRAP|SIGSYS rather than a killing SIGSYS. i.e.
> instead of WIFSIGNALED(stauts) being true, it instead catches a
> PTRACE_EVENT_STOP for SIGSYS, which should be impossible (the process
> should be getting killed).

Oh. This is being ptraced as part of the test?

Yes. The signal started being delivered. As far as that goes that
sounds correct.

Ptrace is allowed to intercept even fatal signals. Everything except
SIGKILL.

Is this a condition we don't want even ptrace to be able to catch?

I think we can arrange it so that even ptrace can't intercept this
signal. I need to sit this problem on the back burner for a few
minutes. It is an angle I had not considered.

Is it a problem that the debugger can see the signal if the process does
not?

Eric

\
 
 \ /
  Last update: 2021-10-29 00:08    [W:0.093 / U:0.644 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site