lkml.org 
[lkml]   [2021]   [Oct]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 7/7] watchdog: s3c2410: Let kernel kick watchdog
    Date
    When "tmr_atboot" module param is set, the watchdog is started in
    driver's probe. In that case, also set WDOG_HW_RUNNING bit to let
    watchdog core driver know it's running. This way wathcdog core can kick
    the watchdog for us (if CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED option is
    enabled), until user space takes control.

    Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
    ---
    drivers/watchdog/s3c2410_wdt.c | 26 +++++++++++++++-----------
    1 file changed, 15 insertions(+), 11 deletions(-)

    diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
    index ca082b1226e3..9af014ff1468 100644
    --- a/drivers/watchdog/s3c2410_wdt.c
    +++ b/drivers/watchdog/s3c2410_wdt.c
    @@ -732,6 +732,21 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
    wdt->wdt_device.bootstatus = s3c2410wdt_get_bootstatus(wdt);
    wdt->wdt_device.parent = dev;

    + /*
    + * If "tmr_atboot" param is non-zero, start the watchdog right now. Also
    + * set WDOG_HW_RUNNING bit, so that watchdog core can kick the watchdog.
    + *
    + * If we're not enabling the watchdog, then ensure it is disabled if it
    + * has been left running from the bootloader or other source.
    + */
    + if (tmr_atboot && started == 0) {
    + dev_info(dev, "starting watchdog timer\n");
    + s3c2410wdt_start(&wdt->wdt_device);
    + set_bit(WDOG_HW_RUNNING, &wdt->wdt_device.status);
    + } else if (!tmr_atboot) {
    + s3c2410wdt_stop(&wdt->wdt_device);
    + }
    +
    ret = watchdog_register_device(&wdt->wdt_device);
    if (ret)
    goto err_cpufreq;
    @@ -740,17 +755,6 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
    if (ret < 0)
    goto err_unregister;

    - if (tmr_atboot && started == 0) {
    - dev_info(dev, "starting watchdog timer\n");
    - s3c2410wdt_start(&wdt->wdt_device);
    - } else if (!tmr_atboot) {
    - /* if we're not enabling the watchdog, then ensure it is
    - * disabled if it has been left running from the bootloader
    - * or other source */
    -
    - s3c2410wdt_stop(&wdt->wdt_device);
    - }
    -
    platform_set_drvdata(pdev, wdt);

    /* print out a statement of readiness */
    --
    2.30.2
    \
     
     \ /
      Last update: 2021-10-28 20:36    [W:4.055 / U:0.240 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site