lkml.org 
[lkml]   [2021]   [Oct]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/3] net: ocelot: add support to get mac from device-tree
Le Thu, 28 Oct 2021 14:22:55 +0000,
Vladimir Oltean <vladimir.oltean@nxp.com> a écrit :

> On Thu, Oct 28, 2021 at 04:15:22PM +0200, Clément Léger wrote:
> > Le Thu, 28 Oct 2021 14:06:12 +0000,
> > Vladimir Oltean <vladimir.oltean@nxp.com> a écrit :
> >
> > > On Thu, Oct 28, 2021 at 03:49:30PM +0200, Clément Léger wrote:
> > > > Add support to get mac from device-tree using
> > > > of_get_mac_address.
> > > >
> > > > Signed-off-by: Clément Léger <clement.leger@bootlin.com>
> > > > ---
> > > > drivers/net/ethernet/mscc/ocelot_vsc7514.c | 5 ++++-
> > > > 1 file changed, 4 insertions(+), 1 deletion(-)
> > > >
> > > > diff --git a/drivers/net/ethernet/mscc/ocelot_vsc7514.c
> > > > b/drivers/net/ethernet/mscc/ocelot_vsc7514.c index
> > > > d51f799e4e86..c39118e5b3ee 100644 ---
> > > > a/drivers/net/ethernet/mscc/ocelot_vsc7514.c +++
> > > > b/drivers/net/ethernet/mscc/ocelot_vsc7514.c @@ -526,7 +526,10
> > > > @@ static int ocelot_chip_init(struct ocelot *ocelot, const
> > > > struct ocelot_ops *ops) ocelot_pll5_init(ocelot);
> > > >
> > > > - eth_random_addr(ocelot->base_mac);
> > > > + ret = of_get_mac_address(ocelot->dev->of_node,
> > > > ocelot->base_mac);
> > >
> > > Why not per port? This is pretty strange, I think.
> >
> > Hi Vladimir,
> >
> > Currently, all ports share the same base mac address (5 first
> > bytes). The final mac address per port is computed in
> > ocelot_probe_port by adding the port number as the last byte of the
> > mac_address provided.
> >
> > Clément
>
> Yes, I know that, but that's not my point.
> Every switch port should be pretty much compliant with
> ethernet-controller.yaml, if it could inherit that it would be even
> better. And since mac-address is an ethernet-controller.yaml property,
> it is pretty much non-obvious at all that you put the mac-address
> property directly under the switch, and manually add 0, 1, 2, 3 etc
> to it. My request was to parse the mac-address property of each port.
> Like this:
>
> base_mac = random;
>
> for_each_port() {
> err = of_get_mac_address(port_dn, &port_mac);
> if (err)
> port_mac = base_mac + port;
> }

Ok indeed. So I will parse each port for a mac-address property. Do you
also want a fallback to use the switch base mac if not specified in
port or should I keep the use of a default random mac as the base
address anyway ?

>
> > > > + if (ret)
> > > > + eth_random_addr(ocelot->base_mac);
> > > > +
> > > > ocelot->base_mac[5] &= 0xf0;
> > > >
> > > > return 0;
> > > > --
> > > > 2.33.0
> > >
>

\
 
 \ /
  Last update: 2021-10-28 16:39    [W:1.314 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site